Dial indicator for Mk3s with hiwin rails mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to mount a dial indicator to the X axis when the top rod has been replaced by a Hiwin 12mm rail.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick design in fusion to hold a dial indicator and check the level of the heat bed when the X-axis has the Hiwin linear rail modification.
Dial indicator shank 8mm.
Requires a M4 by 16mm or 20mm screw. Dial indicator fit snugly in the hole already. Do not overtighten the tightening screw.
Redesign of the clamping of the dial. Now in 2 parts, printing in different orientation makes the clamp stronger. Just need to add another M4 screw.
Found a similar design by user Dan. Gave me the idea to design one to suit modded X-axis