1 / 5
Canyon Aeroad Garmin Varia RTL515 mount with or without AirTag — zdjęcie 1
1 / 5

Canyon Aeroad Garmin Varia RTL515 mount with or without AirTag

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my second attempt of making a mount for the Garmin RTL515 to fit a Canyon Aeroad SP0079

Ocena
1 / 5
Polubienia
21
Pobrania
288
Wydruki
0
Wyświetlenia
1974
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Based on the feedback of the feedback received on my previous design this is slightly more bulky for strength, I have reduced the length and optionally incorporated space for a “hidden” Apple AirTag.

Takes 2x m3x5x4 heat insert.

Takes 2x m3 x8 flat head screws. 

Print the front up-side-down. You probably want to add a brim. 

I've printed the back with AirTag on its side.

Recommended ASA or ABS. 0.1 mm layer height. Go slow (50mm/s) and no cooling for strongest layers and good finish.

 

Thanks to js san for the Garmin mount and Carter West for the AirTag model.

Tagi