Olight Perun 2 mini holder for Leatherman nylon sheath
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Olight Perun 2 mini holder for Leatherman nylon sheath
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The set of tools, Leatherman and Olight Perun 2 mini is an ideal combination. Compact, versatile and high quality. Therefor it needed to be paired up.
I found the holder by Meuriz for the Baton and loved the design. But it did not fit the Perun 2. Therefore I modified it.
The top edge is slightly tapered so the clip easily slides over it. This already keeps it in place, but for the extra security and a satisfying "click" when you place the light in, you can add a metal washer in the bottom of the holder.
To attach through the elastic loop on the Leatherman sheath I used a bolt 60mm x m4 and a m4 melt-in threadinsert, but you can also use a normal (lock)nut.
To prevent a wobbly fit in the elastic loop I designed a mounting tube, this makes it nice and steady. The flat face towards the multi-tool.
Printing tips:
The holder:
Used tree supports at 60degrees for the holder
Infill 90%
printspeed 60
The tube:
No supports, flat faced
infill 60%
printspeed 60
(I needed to drill the hole a bit with 4mm drill, was just to tight fit.