1 / 6
Olight Perun 2 mini holder for Leatherman nylon sheath — image 1
1 / 6

Olight Perun 2 mini holder for Leatherman nylon sheath

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Olight Perun 2 mini holder for Leatherman nylon sheath

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
150
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

The set of tools, Leatherman and Olight Perun 2 mini is an ideal combination. Compact, versatile and high quality. Therefor it needed to be paired up.

I found the holder by Meuriz for the Baton and loved the design. But it did not fit the Perun 2. Therefore I modified it.

The top edge is slightly tapered so the clip easily slides over it. This already keeps it in place, but for the extra security and a satisfying "click" when you place the light in, you can add a metal washer in the bottom of the holder.

To attach through the elastic loop on the Leatherman sheath I used a bolt 60mm x m4 and a m4 melt-in threadinsert, but you can also use a normal (lock)nut.

To prevent a wobbly fit in the elastic loop I designed a mounting tube, this makes it nice and steady. The flat face towards the multi-tool.

Printing tips:

The holder:
Used tree supports at 60degrees for the holder
Infill 90%
printspeed 60

The tube:
No supports, flat faced
infill 60%
printspeed 60
(I needed to drill the hole a bit with 4mm drill, was just to tight fit.