1 / 4
Stihl - Baumkralle / Krallenanschlag Schutzhülle — zdjęcie 1
1 / 4

Stihl - Baumkralle / Krallenanschlag Schutzhülle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stihl - Baumkralle Schutzhülle / Tree claw protective cover

Ocena
0 / 5
Polubienia
14
Pobrania
74
Wydruki
0
Wyświetlenia
488
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ein Modell einer Schutzhülle für die Baumkralle die ich für meine Stihl MS261 gemacht habe. Passt sicherlich aber auch auf andere Kettensägen Modelle.

Die Schutzhülle kann ohne Support gedruckt werden. Die Schutzhülle wird einfach auf die Baumkralle geschoben und hält mit etwas Vorspannung drauf und kann dann auch einfach wieder abgezogen werden.

Ich habe sie aus Prusament PETG gedruckt im Modus 0,2mm Structural.

Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde ich mich über ein like freuen.

 

A model of a protective cover for the tree claw that I made for my Stihl MS261. It will certainly fit other chainsaw models as well.

The protective cover can be printed without support. It simply slides onto the tree claw and holds it in place with a little pre-tension. It can then be easily removed.

I printed it from Prusament PETG in 0.2mm Structural mode.

Have fun printing! If you like the model, I would be happy if you leave me a like

Tagi