Rotary Table USB/Batteries Powered Speed Regulated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of "Rotary Table（simple, adjustable speed, rechargeable）极简旋转台", not a full remake, but a bit of correction.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
remix of "Rotary Table（simple, adjustable speed, rechargeable）极简旋转台", not a full remake, but a bit of correction:
- have cut off the body's top 1mm
- made an insert for the motor (n20 reduction motor, as mentioned in the original model)
other changes require full remodelling, I can make, but this would cost a lot of time…
1 - download and print all model files
2 - buy an n20 reduction motor x1 (ex. aliexpress, I do not give links as they die often)
3 - 2000mAh 7.4v lithium battery with micro USB charging head (can be replaced with other lithium batteries within 3-12v)
4 - 608zz ball bearings x4 (I bought in a nearby shop, may be available on aliexpress)
5 - pwm DC motor governor 1803bk x1 (ex. aliexpress, I do not give links as they die often)
A VERY IMPORTANT NOTICE: if you do not need very high speeds, you may plug the whole thing to usb and do not buy batteries. In case of outdoor usage, just use a powerbank :)
Print Settings
Supports:
YES, obligatory, otherwise bearins won't fit
Resolution:
0.2
Infill:
20% or more
Perimeters:
3 or more, I suggest 6-9