Mini Splitter v2 for MMU2+1s mod - PC4-01 fitting version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Mini Splitter v2 for MMU2+1s mod adapted to use PC4-01 fitting between the splitter and the extruder
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 1579
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Mini Splitter v2 for MMU2+1s mod adapted to use PC4-01 fitting between the splitter and the extruder.
The idea of this mod is to releive the tension in X carriage caused by 10 PTFE tubes connected directly to the extruder.
You will have to print both parts.
- Splitter. It's the version dessigned for FDM. Print the file as it's been uploaded, that is, with the 10 holes facing the bed. No supports needed. 3 perimeters. Infill 15%. Recommended to print with low layer height (0.15 or lower) so the interior of the splitter is as smooth as possible.
- fs-cover. Same print settings as original file from Prusa.
You will need a PTFE tube to join both parts. Recommeded length 70mm. Recommended 2,5/4 PTFE (inner/outter diameter) making a chamfer in both ends.
You can get MMU board firmware here:
https://github.com/gonchogsm/MMU2-1S_Firmware/releases/tag/PC4-01_v1.0
The rest it's the same as in the original version https://www.prusaprinters.org/prints/71799-mini-splitter-v2-for-mmu21s-mod. Needed set screw M3x3mm or larger to fix the PTFE to the splitter (one per PTFE, max. 10)