Liczymy pasujące modele…
Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
This is a very simple coupler for joining 4mm ptfe tubes using PC4-M10 pneumatic couplers. I use these to quick connect tubes from my repbox straight to my printer or MMU2S. Category: 3D Printer Accessories
This is a simple solution for a drybox filament feeder using the PC4-M6 bowden tube coupler. For assembly only a single 8mm hole is needed in your drybox for the filament feeder to pass through. Assembly of these parts does not requires…
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
I designed this M6x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the @suit1337 *Filament Guide Arm M6x1.0-version because the ones I found the hex was to big and obstructed/preventing the connectors to reach the threads…
I removed the existing collet hole spaces, slightly extended the back of the R3 back for clearance, and then added a simple design to hold the five threads for PC4M10 screw in connectors. Fusion 360 file included. .3mf with painted…
This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
Always liked those quick release bowden fittings, but unfortunately the regular sizes (M6/M10) don't fit on Prusa MINI. So I decided to make an adapter. UPDATE 24.07.2020: Stretched the hex-nut a bit, so that the transition between thread…
.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes. For use in CAD, not for printing. https://thangs.com/mythangs/file/605391
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…
This small adapter is a quick solution to use PC4-M6 fittings instead of PC4-M10 fittings. I printed them in PLA because PETG is unfortunately too soft and you can screw them into the M10 thread with an 11mm wrench. Print Settings Rafts:…
PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…
Update 24/03/2026: tighter M10 threads Update 15/02/2026: PTFE passthrough PC4-M10 version (untested) The original model clip-on works really nicely so I wanted to use it. Also I wanted something simpler (although I might built the…
Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead BOM 2 x original screws for PTFE coupler 2 x PC4-M10…
UPDATE: Added to the fun. Included Mordiev 's cap to the front piece. Print with TPU and it works great! I love Antipode's knurled pass through for PC4-M10, and also love kenny93's filament funnel, and then realized the two would work…
Lock clip for PC4 fittings and ptfe tube connectors
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.
Modified spool2kool 's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions ( SpectreGadget 's one shown in the photos). Print recommendations: Printed the clamp in…
tl;dr - use this altered BSPT(British Standard Pipe Thread) to design openings to accept a PC4M10 connector with threads that correctly accept said PC4M10 connector, seat correctly and don't cross-thread a few threads in and cut their own…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
A simple adapter to fit the PC4-M10 connector to the Creality Dry Box 2.0. Designed to fit the 4mm PTFE perfectly into the adapter. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.12 Infill: 20% ATTENTION!! Due…
Finally made a PC4-M10 adapter for push-through bowden fittings. I use it on the extruder drive, so I don't need that extra small piece of bowden tube.
This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
To make multicolored vases, you don't need to weld filament. Just put pieces of different colors into your PTFE tube. As there is a chance of them becoming stuck (ask me how long it takes to get ~40 pieces of filament unstuck in a 150mm…
Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…
Update: I added a M10x1 version besides the M10x1.5 version as many bowden couplers have the finer M10x1 thread. I liked @arcuslinus_110727 mod of the right Core One Handle, but the PC4-M10 bowden coupler was too hard to get in. Thus i…
After cutting myself on a star washer then losing the stupid thing somewhere under the printer table, I broke out the calipers and came up with this. Completely replaces the existing caps and washers and allows you to easily change the…
Creator 5 Pro PTFE holder with threaded hole for PC4-M10 pneumatic fitting. Print in the orientation shown, with supports. For PTFE holders that require NO fittings see here:
Selector front plate with pc4 m10 coupling for MMU3
Connector clip to prevent your PTFE tube from slipping out of a PC4 pneumatic fitting, printed with a 0,2mm nozzle on a X1C, default profile except lowered the layer height to 0,05mm. They are so small its crazy fast anyways, might as…
Improved Tapered thread bowden coupling PC4-M6. the threads were too tight and too weak. based on https://www.thingiverse.com/thing:1993384 Print instructions Category: 3D Printer Parts Summary Improved Tapered thread bowden coupling…
Printed with PETG, 0.4mm nozzle, 0.2 layer height, 20% Grid infill, 3 perimeters, no supports required.
Fits M10x0.75 fittings. Hardware required is 4xM3 socket head bolts and matching hex nuts. Added a STL for a TPU/TPE seal if the surface isn't even but I haven't used it.
A filament valve (passthrough) for a dry box, designed for 1.75mm filament. Take a look at our website for more designs and custom 3D prints: https://halcondesigns.co.uk Print instructions Recommended Hardware: 1 x PTFE Tube Push Fitting…
This piece was made to hold a PTFE tube right above the printing head of an Ender 3 V3 SE/KE
Hey makers, I still had exactly 5 PC4-M10 PTFE adapters and i wanted a long clip to integrate them into Michal Fanta's wonderful spool holder system. So I built in an M10 thread and minimized the holes from 4 to 3 mm so that the PTFE does…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
Drybox cap for PC4-M10 pass through. Print instructions .2 mm layer. TPU or NinjaFlex 2 Perimeters 0% Infill (makes it more flexible) To install the PC4-M10 use a 23/64 drill bit to drill a hole in the Drybox. Place the cap on the fitting…
From the original designer: It's a piece of work that combines a filament guide and the original filament detector stand. All the models are No support needed ! A 608 bearing is needed. And just add 2 short piece of PTFE tube (lower one…
I love the Polymaker PolyDryer boxes, but I wanted a way to securely connect the 4mm PTFE tube to the box, so I made this model. The adapter is chamfered on the inside to gently guide the filament to the coupler. It can be installed on…
I tried about 5 different version of the Y-splitter but the filament kept snagging on the edges of the entry of the tube. Finally decided to create my own version. This version takes into account the wider 2.5mm inner diameter of the…
selector front plate for prusa mmu2 and mmu2s with direct pc4m10 coupling. Meaning no hole that the filament has to pass trough. Design is done in openSCAD. File is include. If you want to modify it you need to add…
Update 6/21/2019: Added v2 of both versions. Updated the original mount as I had made the 90 degree mounting hole in the wrong position. I have printed the original version and everything works great. Threads were perfect too. Also added…
With a heigt of 2.05 mm the original lock clip fits to the PC4-M10 couplers perfectly. Thanks to the original author! Printed with Prusament PETG, no infill, 4 perimeters, 0.2mm layer height.
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
A filament filter that snaps on to a PTFE tube, using a PC4-M10 coupler. Put a small piece of foam inside of it and ram a pointy piece of filament through the entire filter several times. This is to form a hole and remove any chunks of…
Just 2 versions of clips on which we can screw PC4 (Push to Connect) M6 PTFE fitting. I don't have CAD software to edit STEP files then i updated the original STLs using Blender. The threads were generated with OpenScad before integration…
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
Print with ABS or PETG with brim and no support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. Don't use too much force when screwing in the PC4-M6's. Fully push the bowden tubes through…
Press fit PTFE tube connector for the Eibos Easdry filament dryer. The barbed end press fits directly into the rubber grommet in the housing of the dryer. The threaded side accepts a PC4-M10 fitting to connect PTFE tubing. I printed in…
I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 5x5mm magnets .
PC4-M6 model for modeling purposes
Remix : 1.logo X1 → P1P 2.improve filament plug phenomemon 3.add a magnetic base with 2 6*3 magnets BOM ： 1.glue 2.6*3 magnets X7（N52 will be better） Print Material: PETG (optimal) - PLA (best) Layer height: 0.08mm (optimal) - 0.12mm…
Created this plug to keep air out of the drybox created by @BramElema_470201 . I wanted to print the drybox to be able to adapt and change with my needs as the mmu3 is released so this plug helps fill the PC4-M10 holes on the front and…
Prusa screwed up bad with their PTFE conectors - they are unobtanium, along with brass olives that you CAN'T even order from them. So I modified greatest thing ever made by Ondřej Kotas on thingiverse (…
I struggled to get the Bowden tube out of the stupid fitting on the print head for exactly one time before sitting down and working on this mod. There is exactly enough space for a PC4-M6 Fitting. Potential Benefits: No fighting the…
This is a modified version of the official XL Filament Sensor blocks that were reworked to accept a PC4-M10 fitting. I have also provided a 2x filament sensor block. I made this mod because I was tired of the PTFE tubes popping out the…
Many printers, especially those with a Bowden extruder, use PC4-M10 fittings to retain the PTFE tube at the extruder. Reportedly on Bowden printers it helps with retraction if the fittings at both ends have a firm grip on the PTFE tube so…
New Y splitter PC4-M10 flat curve V3 ; perfect shape runs well / 2 X PC4-M10 (2X M3x10) Y splitter is awesome for changing filament to manual spools some of the PTFE tubing :)
Printed fittings to use with the Creality Space Pi X4 and PC4-M6 fittings that prevent PTFE tubes sliding in to the standard ports and getting wrapped around your filament spool. Because the PC4-M6 fitting butts up to the printed part,…
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
Description: This Y-Pipe Splitter allows you to easily utilize both the Bambu Labs AMS and the standard spool without PTFE tube disassembly. Background: Brandon's Over-Engineered Y-Splitter is fantastic, but the insert action on the inlet…
This is a remix of Wardy89's MK3S filament guide on Thingiverse ( https://www.thingiverse.com/thing:3425397 ) This is designed to fit the Bondtech BMG upgrade for the MK3S and the MK2.5S with either the V6 or Slice Mosquito Hot ends. The…
A slightly modified version for M10 socket connectors and for my design of the lower filament feeder in the Snapmaker U1 printer. The author of the original version is: Lukáš Komenda Buy him a coffee!
This angled adapter allows for a very clean connection of a reverse bowden filament feeder to your MK3S printer (such as from a dry box). The adapter allows mounting two PC4-M10 fittings (M10x0.9 thread), to connect the extruder end to…
Suitable for Dyna Dry Box with 56mm diameter at the opening. You need to drill 4 holes (3x 3mm for mounting; 1x 2,5mm center). The inner part can also be used as a drilling template. For mounting I recommend 3x M3 screws with a length of…
Un semplice raccordo per collegare il tubo PTFE all'essiccatore Sunlu tramite il connettore PC4M10. Il cavo bowden garantisce al filo protezione dalle basse temperature e dall'umidità dell'ambiente circostante, permettendogli di mantenere…
The plug can be used to close PTFE pneumatic tube fittings when not in use. For example, on a modified RepBox this can be used to avoid humidity entering the box. the plug has an inner cone which will clamp onto filament when inserted.…
Allows you to attach a piece of PTFE tubing using PC4-M6 type fitting to guide filament somewhere you want / need.
added a pc4-m6 connector and ECAS04
This is done at your own risk as there is of course the possibility of cracking or destroying your lid. This adapter allows a PC4-M10 PTFE connector to be mounted on the rear top of the Creality Space Pi Plus Dryer, either vertically or…
This adapter is for the wall-mounted drybox only If you need this for another size bowden coupler, just drop me a message and I'll change it to what you need. Update V2: Larger hole (3.8mm) that the filament passes through to reduce…
I designed this M10x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the @suit1337 *Filament Guide Arm M10x1.0-version because the ones I found the hex was to big and obstructed/preventing the connectors to reach the threads…
A filament guide designed to be used with a side mount spool on the Ender 3 V3 SE. Redesigned the filament guide and added a way to connect one or two PC4-M6 connector(s) to it. Works very well together with the reverse bowden adapter:…
This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…
Voron M4 with PC4-01 Bowden Connectors This is a remix of the beautifully designed Voron M4 extruder. Since the bowden collet in the original design is a little bit hard to source, I've adjusted the size of the hole to fit a more common…
Firm and sturdy Clip for Quick fitting PC4-M10 connectors. These connectors are common on 3D printers, especially for PTFE tubes, Hotends and mods (Bambu Lab splitter, dry boxes, etc.). The clip prevents the PTFE tube to come out of the…
The christmas present for the community! Printed replacement for bowden coupling PC4-M6 or PC4-M10 (compatible with heatsink or another printer part). A little filing with a 4mm drill bit may be necessary on the printed part. IDEA: I…
I remixed the selector front plate to accept a PC4-M10 coupler.
This is an adapter to allow the Creality Sprite extruder to utilize a PC4-M10 PTFE coupler. It requires the addition of one M3-8mm screw to hold it in place. This file was created in Tinkercad and the file is public... you can modify it…
Thread adaptor to use M6 sized PTFE Connector with alternative M10 thread Hexagon has same 10mm external profile as the connector. M6 thread self-taps into plastic. Original Parts:
Addon to allow for a stable and airtight feed from a good angle. Mount it with VHB tape or similar. Enjoy! =)
This is a remix of the fantastic Splitter but not screwable. Thank you @ EdJohnson for the great peace.
Remix of prusa fs cover for PC4-M10
This is a remix of part R1 for the Prusa Mini extruder. This will allow the use of a PC4-M10 fitting without an adapter. Original file can be found here. https://www.prusaprinters.org/prints/57214-mini-printable-parts
This is a remix of Prusa i3 MK3S+ Extruder Stepper Cooler Add-on (for 40x40 Fan) by Strathpeffer3D with an added thread for a PC4-M10 pneumatic connector and updated for MK3S+. MK3S and MK3S+ have different FS-Cover slots (thx to HayaMini…
A simple remix from original MK3s+ "fs-cover" and "MK3s PC4-M6 FilamentSensorCover" by RoboMagus to connect a reverse bowden setup using a PC4-M6 coupler on MK3s+.
.20mm layer height, 2 walls, 100% infill, any infill pattern you want. Tight tolerance, so PUSH!!! it on. Don't worry, you won't break anything.
This simple design collection aims to couple, fix or pass through regular 4mm PTFE tubings in various ways using PC4-M10 pneumatic quick connectors. It can be used to join two separate PTFE tubes together or can serve as pass through for…
PC4-M6 (female) to PC4-M10 (male) adapter. Ran out of PC4-M10 fittings and remixed this from a few other creations to use in the meantime. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes…
I have modified the front plate so that a PC4_M6 coupler can be mounted. The original version was R3
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![New Angled Coupler for PTFE Tubing [PC4-M10]](https://media.printables.com/media/prints/37394/images/369595_474b669c-2177-4d92-bb73-0382863ed5f2/img_3225.jpg)
![Y-splitter PC4-M10 flat curve V3 [Bambu Lab X1/ X1C]](https://media.printables.com/media/prints/543366/images/4604716_cf4bc2c4-371b-475f-93dc-c89454cbe9b7/img_20230908_073014.jpg)
