Voron M4 with PC4-01 Bowden Connectors and Dual-color Guidler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron M4 mod to fit a more common PC4-01 bowden connector.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 277
- Wydruki
- 4
- Wyświetlenia
- 2591
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Voron M4 with PC4-01 Bowden Connectors
This is a remix of the beautifully designed Voron M4 extruder.
Since the bowden collet in the original design is a little bit hard to source, I've adjusted the size of the hole to fit a more common PC4-01 connector.
Assemble as the original design and screw the connector directly into the printed parts. The fitness may vary from different printers but mine fits tightly (still need to test how long can it last).
Also I made a mod to split the guidler into a multibody part to print it in dual-color like shown in the photo.
Parts needed
- To adapt the PC4-01 connector, only the main_body and end_plate are modified, and the mirrored version is also included. The other parts and the documents can be downloaded from the voron design github.
- The dual-color guidler is uploaded as a multibody stl. It can be printed with a simple filament swap method.
Print Settings
The same as the printing guidelines in the voron document (ABS, 4 perimeters with 40% infill).