Bowden Y-splitter for Qidi Box (AMS) , PC4-M6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No catch Y-splitter, working very well, designed it for my Qidi Plus 4 and Qidi Box
- Ocena
- 4,85 / 5
- Polubienia
- 114
- Pobrania
- 849
- Wydruki
- 19
- Wyświetlenia
- 3415
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections.
Please look for pc4-m6 “through” type, for reference https://www.aliexpress.com/item/1005006176616947.html?spm=a2g0o
This splitter will only work with OD 4mmx ID 3mm(or wider) Bowden tube.
Checked both: horizontally and vertically printed and looks there is no issues with catching filament.
Vertical print needs to be done with supports as per screenshot ( please place support blocker as shown on photo)
Update 28/09 im using vertically printed splitter since i posted this model, not a single catch on this splitter working together with Qidi Box
Make sure ptfe tubes are inserted as per diagram shown on one of the photos
Thread for PC4-M6 is almost perfect fit, shouldn't be problem with it.
Printed with 0.12 layers, first 0.2.
0.4 nozzle
Please check my other accessories and remixes for Qidi
Thank you