Bowden Y-splitter for Qidi Box (AMS) , PC4-M6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No catch Y-splitter, working very well, designed it for my Qidi Plus 4 and Qidi Box
- Rating
- 4.85 / 5
- Likes
- 114
- Downloads
- 849
- Makes
- 19
- Views
- 3,415
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections.
Please look for pc4-m6 “through” type, for reference https://www.aliexpress.com/item/1005006176616947.html?spm=a2g0o
This splitter will only work with OD 4mmx ID 3mm(or wider) Bowden tube.
Checked both: horizontally and vertically printed and looks there is no issues with catching filament.
Vertical print needs to be done with supports as per screenshot ( please place support blocker as shown on photo)
Update 28/09 im using vertically printed splitter since i posted this model, not a single catch on this splitter working together with Qidi Box
Make sure ptfe tubes are inserted as per diagram shown on one of the photos
Thread for PC4-M6 is almost perfect fit, shouldn't be problem with it.
Printed with 0.12 layers, first 0.2.
0.4 nozzle
Please check my other accessories and remixes for Qidi
Thank you