TPU Sleeves for Spool Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't want to mess around with tape so I've decided to create some TPU sleeves.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 2762
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
You need 2x per roller axis. They are meant to be press-fit. If you put them on the outermost of each axis you are able to use spools up to Prusament spools (are my widest).
Hint: The sleeves are for the bigger-spool-inserts :) In the comments I got the information that you need to scale it down to 70% in diameter to use the sleevees with the smaller ones. (Not tested by myself)
Improvements:
- Spools moves better instead of scratching over the plastic.
- Reduces noise.
Print:
- Print with TPU (I've used ERYONE TPU 95A)
- .15 or .20 layer thickness
- No support needed ;)
Please see my other models used for my drybox based on a IKEA Samla box: https://www.printables.com/@Mike_88377/collections/1315141