GSO 6" f/4 Newtonian Secondary Spider - 3D Printable Replacement/Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
**Description:** This is a 3D printable model of a secondary spider designed for a GSO 6" f/4 Newtonian telescope. It's
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
**Important Notes:** * **This is a user-created design.** It's crucial to verify compatibility with your specific telescope model and make any necessary adjustments. *
**Collimation is essential.** After installing this spider, you will need to carefully collimate your telescope to ensure optimal performance. *
**Material selection is critical.** Consider using materials like PETG or ABS for their strength and temperature resistance. PLA might be suitable for testing but is not recommended for long-term use in varying temperatures. *
**Print settings matter.** A higher infill percentage and thicker walls will increase the spider's rigidity and stability.
**Features (Depending on the specific design):** * Optimized arm thickness to minimize diffraction spikes while maintaining structural integrity. * Precise mounting points for the secondary mirror holder.
* Designed for easy installation and alignment. * May include options for different arm configurations (e.g., curved or straight). **Printing Recommendations:**
* Material: PETG, ABS (PLA for testing) * Infill: 30-50% or higher * Layer height: 0.2mm or less * Supports: May be required, depending on the design * Orientation: Print for maximum strength along the spider arms.
**Disclaimer:**
* This is a user-created model, and its performance may vary.
* The creator is not responsible for any damage caused by improper installation or use. * Always exercise caution when working with telescopes and optical equipment.
**Before Printing:**
* Measure your existing spider to ensure compatibility.
* Carefully inspect the 3D model for any potential issues.
* Verify the center hole size for the secondary mirror holder.
**Post-Printing:**
* Clean and smooth any rough edges.
* Carefully install the spider and secondary mirror holder. *
Perform a thorough collimation of your telescope.
**Files Included:** * STL file(s) for the secondary spider.
