1 / 2
GSO 6" f/4 Newtonian Secondary Spider - 3D Printable Replacement/Upgrade — image 1
1 / 2

GSO 6" f/4 Newtonian Secondary Spider - 3D Printable Replacement/Upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

**Description:** This is a 3D printable model of a secondary spider designed for a GSO 6" f/4 Newtonian telescope. It's

Rating
0 / 5
Likes
4
Downloads
30
Makes
0
Views
256
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

**Important Notes:** * **This is a user-created design.** It's crucial to verify compatibility with your specific telescope model and make any necessary adjustments. * 

**Collimation is essential.** After installing this spider, you will need to carefully collimate your telescope to ensure optimal performance. * 

**Material selection is critical.** Consider using materials like PETG or ABS for their strength and temperature resistance. PLA might be suitable for testing but is not recommended for long-term use in varying temperatures. * 

**Print settings matter.** A higher infill percentage and thicker walls will increase the spider's rigidity and stability. 

**Features (Depending on the specific design):** * Optimized arm thickness to minimize diffraction spikes while maintaining structural integrity. * Precise mounting points for the secondary mirror holder. 

* Designed for easy installation and alignment. * May include options for different arm configurations (e.g., curved or straight). **Printing Recommendations:** 

* Material: PETG, ABS (PLA for testing) * Infill: 30-50% or higher * Layer height: 0.2mm or less * Supports: May be required, depending on the design * Orientation: Print for maximum strength along the spider arms. 

 

**Disclaimer:**

 * This is a user-created model, and its performance may vary. 

 * The creator is not responsible for any damage caused by improper installation or use. *    Always exercise caution when working with telescopes and optical equipment. 

 

**Before Printing:** 

* Measure your existing spider to ensure compatibility. 

* Carefully inspect the 3D model for any potential issues. 

* Verify the center hole size for the secondary mirror holder. 

 

**Post-Printing:** 

* Clean and smooth any rough edges. 

* Carefully install the spider and secondary mirror holder. *

 Perform a thorough collimation of your telescope. 

**Files Included:** * STL file(s) for the secondary spider.

Tags