Counting matching models…
Real quick: Check out my other S22 designs like my LED handle/boomerangs , help me spread my design by hitting the like button , post a photo as a make once you've printed things out!! There's an active community on this, come: join the…
Overview This is a complete 3D printed replacement for the Kingsong S18 side panels. The aim is to create a more ergonomic and slim design that enables the use of any pad setup while adding more protection and making it much easier to…
Printed from TPE 88 RubberJet Flex Nozzle 0,8mm Layer 0,6mm support - YES walls - 2 infill - gyroid 15% Raft - YES I printed it on my Prusa MK3,9 on PEI sheet with normal transparent tape.(raft because tape is extremly bad to tear down)…
Fairing for KS S22. Model is for LEFT side, mirror for right side. Print fits on Prusa I3 MK3s when placed diagonally on the bed. Printed with 3 Perimeters, 20% infill, PLA+
My design for the S22 handle and side plates! Printed in TPU it's super durable and strong. Add some color, pattern, etc. Add new features, holders, clips, etc. Or just replace broken parts. I've added an LED channel though all parts too.…
(distant remix of the linked one!) My improvement for the tragic s22 trolley handle! This handle addresses all the major gripes I had with the stock handle (well, before I broke it): It's significantly taller, standing at about 5.5in in…
Printable Quickstand and Bumper for S18. Easy print, no support. I ve printed mine with PLA, you may also use TPU. You can use Velcro to put the part on the S18.
Thingiverse import! I don't own any of this. Designed by Nate Waddoups https://www.thingiverse.com/thing:5426967 "The top of the King Song S22 chassis ends with a sharp 90 degree angle, which gets painful after a while. They provide pads…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
Primary Mirror Mask for newtonian telescope: GSO 150/600 f/4 TS Photon 154/600 f/4 Orion Optics 150/600 f/4 This is a set with a mask and 3 TPU-Mirror clamps. i designed the parts because the original brackets protrude too far into the…
KingSong S18 EUC stand. The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong…
Ladestationhalterung für die Toniebox. Chargingstand for Tonie Box.
A seat for the kingsong s18 EUC. The fitting is based on the idea of an existing model in https://www.thingiverse.com/thing:5609940, but this is a complete remake. For me it feels much more confortable and ergonomic. It's also way easier…
I scanned my own seat with professional machine (HEXAGON Absolute Arm 85), if someboy needs it… I dont print it yet. My seat is a little bent, it's not completely straight, but maybe it will help someone… :) //Update 16.6.2023: i repair…
This is part of Electric Unicycle (EUC) Kingsong S22. Usually, this rubber protector is lost, so you can print it using TPU.
Handle is stronger than original one please lay on bed on longer side… Buy me a coffee: https://ko-fi.com/jokereuc
Bottom handle functions as original. Top handle can be used for seated riding. Lower versions may fit better if you don't have a high seat like on the photos (but I've not tested them). Handle is assembled from four pieces: two 25mm PVC…
Power pads and brake pads for the Kingsong S18 EUC. You have to take out the original upper foam pads and fix these with hook and loop fabric. I prefer power pads not so tall, more for some tactile feedback.. They wont get in the way when…
Printed with supports and 0.1mm layer height for leg strenght
Замена штатных фар на направленные вниз
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
The mudflap on my kingsong 16X tore off with an offroad session so obviously I wanted to replace it. The original one is big and not that great to look at so I went on and made a new design. I started with making the blank bumper which is…
Works great on the stock front handle, my replacement side handle , or even on the telescoping trolly handle! Print it in TPU for ultimate durability, but rigid filament will be fine too. Needs supports for best results. Shaped for the…
Simple primary mirror mask to cover the often imperfect mirror edge. The inner diameter is 195mm Printable on 210mm print beds like prusa mk3s can be used with such primary mirror cell: Teleskop-Express: GSO Hauptspiegelfassung für 8"…
Handle is longer for comfortable sitting please lay on bed on longer side… Buy me a coffee: https://ko-fi.com/jokereuc
The trolley handle is always the first thing that breaks on the S22 and it takes forever to get a replacement. I wanted something close to the original in terms of dimension and not something super tall so here you go. First time doing…
Die Gurte der Sicherung für das manuelle Aufstelldach blockieren gerne das Schieberollo. Mit diesem Halter und einem 10x10x5mm Neodym Magneten, sowie 2 Streifen doppelseitigem Klebeband können die Sicherungen schon aufgeräumt werden und…
Bahtinov mask for GSO and other equivalent Ritchey-Chrétien 12" f/8: Aperture: 12" / 304 mm Focal Length: 2432 mm Focal Ratio: f/8 The mask is made from 4 parts, each one size is approximately 180x170mm, so you don't need a big printer to…
KingSong S18 wire protector infill 90% might need longer M2 screws 18mm designed to use #6 x ¾ screw and nut
I printed from TPU(recommended) or PET-G 0.4mm nozzle 0.2mm layer, 3 walls, infill 40% (cubic adaptive) On one side stick velcro and mount your licence plate or banner… 🙃 Buy me a coffee: https://ko-fi.com/jokereuc
Replacement for KingSong S22's controller seal. Replaces old crappy paper-ish seal. Should be printed from TPU.
This is a little kickstand I made for the KS 18XL electric unicycle. The overall length is 5.5 inches (file was made in inches so you might have to scale it). Requires qty (2) 3x23mm screws available at any RC store. Just ask them to look…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
I scanned my own kickstand with professional machine (HEXAGON Absolute Arm 85), if someboy needs it… Print from TPU(recommended) or PET-G 0.4mm nozzle 0.2mm layer, 3 walls, infill 50%+ (cubic adaptive) I dont print it yet. If somebody…
Replacement side pads for Kingsong 16X Including holes for the bolts so you won't have to remove the side pads again if you want to open up your 16X. Printing in TPE is okay, but lasercutting a rubber material would be best since the…
Wall mount for the stock charger for Kingsong S22 You can mount the charger in any direction - and there is a convenient holder for the charger cable Printed with a 0.6 nozzle 0.4 layer heigh 0.4 nozzle and 0.3 layer height is ok as well…
This fixes inside a RC10 telescope to reduce stray light photons. This is important for astrophotography and astrometric reductions.
The standard rollers for the S22 wear quickly. These TPU rollers are very tough. I have done over 2000km on them and they have shown negligible wear. The first versions were a little loose around the bearing and became worse with age, so…
Replacement kneepads for Kingsong 16X Recreated the original shape first, with addition of holes for the bolts so you don't have to destroy the sidepads again when opening up your 16X Alternative shapes available for printability.…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
print 1x normally and 1x mirrored
Remixed for JBL essential Print from TPU/TPE Buy me a coffee: https://ko-fi.com/jokereuc
Replacement for Kingsong's S18 EUC rear panel. Designed to be printed flat with a bendable trick from @teachingtech (https://www.printables.com/model/556103-making-flat-but-bendable-models-with-a-slot-patter) and assembled with…
This isn't quite a remix, but this is a kickstand specifically for use with this fairing replacement kit. It utilizes the geometry of the fairings and the included m4 attachment points. I used 2x 8mm m4 threaded inserts in the rod, 2x…
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
I scanned my own broken upper battery holder with professional machine (HEXAGON Absolute Arm 85) and repair model, if someboy needs it… it is prepared for CNC milling from aliminuim (my plan), because original part is extremly fragile I…
Mystery Science Theater 3000 - Joel Hodgson & Crow T. Robot & Tom Servo - 1988-1999 3D printable model.
Handle is longer for comfortable sitting with accessories :) please lay on bed on longer side… Printed from: Prusament PETG Lipstick red Perimeters: 3-4 Infill: 20-30% ------------------------ I use soldering iron to heat and add 8 brass…
Modeled a 51mm x 0.6 pitch thread, seems to work great for the GS0 5X80 OTA. ID of the 1.25" eyepiece hole may need a bit of sanding to fit - wanted mine to be snug. I printed out of PLA with 10mm brim using a .025mm nozzle. I increased…
print 1x in normal orientation and 1x in mirrored oriantation (LH / RH side) i glue it with superglue
Visit my Cults3D page for more designs There are two different files, one for the right side of the wheel and another one for the left side, where the cable cover is. No need to take the cable cover off. You will need 4x m3x12 bolts How…
After acquiring my longtime dream astrophotography scope, a 10" Truss Tube RC, I went through the process of making it the imaging beast I knew it could be. After taking care of known issues, like the baffle tube not being long enough, I…
When you install a spring shock absorber, the spring can hit the wheel shell on back travel. Install these dampers to prevent it. They are installed between the pedal hangers and suspension slider. A little demo:…
Lights replacement for KingSong S22 EUC
The original Kingsong S22 sliders are subject to inward lateral pressure when coming off drops and jumps. This causes the bolt heads that hold the rollers to bind and scrape in the slider channels, causing high friction, scraping noises…
This is a remix of https://www.thingiverse.com/thing:4819092 That model has some design flaws and uses m3 nuts. I have altered that design to make use of Ruthex M3 inserts that are inserted with a soldering iron. If you break a bracket…
new version for the https://www.printables.com/model/940843-kingsong-ks-18l-kickstand . corrected distance between screws and made it sturdier, with support from the lateral shell. also, added a front bumper (or rear bumper, if you prefer…
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
Mask for focusing inner diameter is 111mm outer diameter is 116mm there is already a version with a light mounting
**Important Notes:** * **This is a user-created design.** It's crucial to verify compatibility with your specific telescope model and make any necessary adjustments. * **Collimation is essential.** After installing this spider, you will…
"Holy charm symbolising a union between higher beings. The bearer will slowly absorb the limitless SOUL contained within. Opens the way to a birthplace." This charm is more than just an artifact. It is a pact, sealed in pale stone. It…
A bahtinov mask with a convenient handle to pull it out of the OTA a bit over built thickness wise. I will upload another version with less thickness. I realized after printing this that it was unnecessarily thick and wasteful of…
Hi. First, the locking mechanism on one side of the handle of my Kingsong 16X broke (after a little over one year of use). After three years of riding, the other side broke as well. I believe this may be a common issue, so here is my…
UPDATE: new version, way stronger and more stable kingsong ks-18l ---> sturdier kickstand and front bumper by zeraldo | Download free STL model | Printables.com I've tried the first version in TPU, but it was not stable at all. It got…
I made this remix of hjodr's pedal pusher because the design had some minor flaws. I also made the ribs slightly different, The part can now be printed on it's side without support! I would advise to print with PETG Print Settings Printer…
This is a simple secondary mirror mask I made to ease collimating the focuser with a laser. If you have trouble with it like I do this makes it quick and easy. This is sized for the RC8 secondary baffle tube. I have supplied the FreeCAD…
Lower protection covers / armour for the KingSong S16 PRO monocycle. First: The left and right set is screwed on with 2 M4 × 50mm cylindrical hex socket screws. Mounting: Unscrew the rear lower speaker screws. Slide the entire assembly…
KingSong S22 mount for these headlights: https://aliexpress.ru/item/1005001794172948.html Uses stock S22 headlight screws for mounting. There are two models, the main difference is mounting height. Higher version uses only two screws.…
Print in min 2 shells, with supports.
Hang your Kingsong 16X charger on the wall to save space! This is for the original 2.5A charger Category: Tools
Posted by request. A modified part to mount a GSO 2" EAF compatible Crayford Focuser, Manufacturers part number PAF-GS-N2-M-FRF-D-DW432. It also needs a base adapter for the focuser, the Agena Base Plate for 2" GSO Reflector Focuser -…
KingSong KS16 PRO bottom pads made of TPU for the EUC. There are various variations on the topic, but I didn't find any that would fit me completely and were free, so I modeled my own. Main part in TPU, inserts for the front pads that are…
The kit consist of three parts for each bumper. The Suspension Support (2 per bumper, left and right sides are mirrors of each other) The vertical Bumper (2 per bumper, left and right sides are mirrors of each other) The horizontal Handle…
“RINGsome” - the easy and versatile concept for rings This ring concept is the successor of the previous posted “ ring with big plate (very versatile) ” - now it is more stable and the design more streamlined. It also comes with a bigger…
This mount is inserted into the USB port hole at the front, and fixed in place using the mounting bracket in the back. Yep, you need to sacrifice USB ports to install this mount. Although, in the future, I will probably make a version…
Added additional material on the top where the original is the weakest and beefed up with a few fillets. Used normal supports. Printed in ASA with 0.28mm layer height on AnyCubic Kobra S1. Modeled with OnShape.
Stronger and beefier than the original (since Kingsong reused the wire type support on both sides). Provides good clearance from the wheel. There is plenty of extra room to make it larger, so I will redesign it if there are any issues.…
Top cover that was epoxy/super glued to the original rubber cover. The tab on the original cover easily detaches from the cap. Makes it easier to take on and off. I will redesign if the glue does not hold up over time. Printed in ASA with…
This simple plate allows you to attach that weird mounting foot of ES 10x60 to existing M4 holes on your GSO RC8. Insert four M4 nuts into the base Chose four M4 screws for them that won't go too far in and damage your scope body. At…
Small light/dust cover for the KingSong S16 Pro. Just slide it into the light slot. Minor scaling adjustments may be needed depending on print quality. PETG is recommended. LS.
Hi ! I made this to have a power socket on my desk without having to go under the desk plug something on my power strip everytime i need something. Commercially available solution are all multi socket but given it would already be pluged…
Caution: You can look at sun through optics without protection exactly twice: first with left eye, second time with right eye. Never point telescope at Sun without solar filter on both telescope and finder. Even if not looking,…
Small inserts for standard KS16 PRO top pads. When printed with PET-G and polished, they look almost like additional reflectors. It's a minor addition, but I like it, maybe someone lese will use it. Glued on with thick, good double-sided…
Custom 3D printed bottom attachments for KS16 PRO foot pads. Screwed onto the existing original pads. They have screw-in spikes, and the top surface is covered with grip tape. Good for EU shoe size 45. I couldn't find any others on the…
The model is for the left side — mirror it for the right side. The model isn't perfect, but good enough. It follows original model curvature very well, including the notch for the suspension pipe. On the photo you can see it installed (on…
I want cat ear too, but my headphone are not a common. So I made my own clip for this system.
für 50mm Schlauch / for 50mm hose Dieses Modell wurde mit PETG-CF gedruckt. 0,3mm Layerhöhe und organischen Stützen, wobei es nicht auf Schönheit ankommt, da es ein mechanisches Bauteil ist. Kein Infill
Kingsong S22 battery box bumper
Front camera mount for the KingSong S16 Pro. Just unscrew the original handle mount on the front, replace the existing screws with longer ones (M4 x 16 / lens), and you're done. It fits standard sports camera mounts. LS
INGSOC from 1984 Please support me by following me
GSO 1.25" EAF-compatible dual-speed Crayford focuser base + mounting plate for a Gemini EAF (adapted for a 130mm Newtonian tube) I bought this focuser, and the shop offers a choice of two base plates for mounting it to the tube — the one…
On an 8" Newtonian telescope I inherited and now use to do variable star photometry, there's a gap between the focuser and the telescope tube -- this focuser probably wasn't meant for this telescope. Not to worry, a 3D-printed part can…
Hi. First, the locking mechanism on one side of the handle of my Kingsong 16X broke (after a little over one year of use). After three years of riding, the other side broke as well. I believe this may be a common issue, so here is my…
On an 8" Newtonian telescope I inherited and now use to do variable star photometry, there's a gap between the focuser and the telescope tube -- this focuser probably wasn't meant for this telescope. Not to worry, a 3D-printed part can…
Posted by request. A modified part to mount a GSO 2" EAF compatible Crayford Focuser, Manufacturers part number PAF-GS-N2-M-FRF-D-DW432. It also needs a base adapter for the focuser, the Agena Base Plate for 2" GSO Reflector Focuser -…
The Problem If you own a KingSong S18, you probably know the annoying rattle caused by the inner wheel cover. The original design relies on only two small screws per side, which often loosen over time, causing the fender to vibrate or…
