kingsong ks-18l ---> sturdier kickstand and front bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
improved kickstand and front bumper for the KS18L
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 1
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
new version for the https://www.printables.com/model/940843-kingsong-ks-18l-kickstand .
corrected distance between screws and made it sturdier, with support from the lateral shell.
also, added a front bumper (or rear bumper, if you prefer the kickstand on the front, which may not be a good idea, since the power button would be faced down).
print the kickstand in PETG, with 6-8walls and 50% infill, 2mm top/bottom width. the bumper may be in PETG or TPU, with whatever settings you like.
as it turns out (but not exactly planned), the front bumper may also serve as a kickstand, although not as stable as the actual one.
double-side tape may be positioned on both side “wings”, to add extra grip and stability.
they may be printed without support, if you rotate 90°.
I hope it's useful to someone.
please, share it if you print it :)