1 / 1
kingsong ks-18l ---> sturdier kickstand and front bumper — zdjęcie 1

kingsong ks-18l ---> sturdier kickstand and front bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

improved kickstand and front bumper for the KS18L

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
1
Wyświetlenia
195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

new version for the https://www.printables.com/model/940843-kingsong-ks-18l-kickstand .
corrected distance between screws and made it sturdier, with support from the lateral shell.

also, added a front bumper (or rear bumper, if you prefer the kickstand on the front, which may not be a good idea, since the power button would be faced down).

print the kickstand in PETG, with 6-8walls and 50% infill, 2mm top/bottom width.  the bumper may be in PETG or TPU, with whatever settings you like.

as it turns out (but not exactly planned), the front bumper may also serve as a kickstand, although not as stable as the actual one.

double-side tape may be positioned on both side “wings”, to add extra grip and stability.

they may be printed without support, if you rotate 90°.  

I hope it's useful to someone.

please, share it if you print it :) 

Tagi