1 / 1
GSO 8X50 RA to Guide Scope Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converts the finder scope to a guide scope w/ easy swapping between them - Print w/ 0.25mm nozzle due to thread size.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 51
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modeled a 51mm x 0.6 pitch thread, seems to work great for the GS0 5X80 OTA. ID of the 1.25" eyepiece hole may need a bit of sanding to fit - wanted mine to be snug.
I printed out of PLA with 10mm brim using a .025mm nozzle. I increased perimeters to make 100% solid. I did this since I don't recommend 100% infill on delicate cylinders - may ruin the print from changing between concentric to linear motion.
Also used adaptive layer height and used 0.07mm layer heights for the threads.