DIY Router table lock ring - Jess-em insert compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Making your own router table? Here is a simple lock ring that you can inset into some ply or mdf for jessem inserts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
Use at your own discretion
Routers are no joke - and plastic tabs are probably not the strongest material to use.
Warning aside,
This is a simple router table insert that allows you to also use compatible router plates in the jess-em style (no idea if other inserts might work). (I used https://www.printables.com/model/675711-jessem-compatible-ring-inserts-for-router-lifts)
Lock ring dimensions:
- 4 ¾" outer diameter
- 3/8" thick
- 3 ¾ inner diameter
Included is a routable template guide designed for a ¾" OD guide bushing and a ½" bit. Route to a depth of 3/8".
- Tape template into position
- Using a trim router, route out the inner portion of the playwood/mdf to a depth of 3/8" depth
- Cut out a hole no more than 3 ¾ diameter
