1 / 2
DIY Router table lock ring - Jess-em insert compatible — image 1
1 / 2

DIY Router table lock ring - Jess-em insert compatible

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Making your own router table? Here is a simple lock ring that you can inset into some ply or mdf for jessem inserts

Rating
0 / 5
Likes
4
Downloads
29
Makes
0
Views
163
Reviews
0

Updated at source:

Model information

Category
Tools
License
BSD License

Use at your own discretion

Routers are no joke - and plastic tabs are probably not the strongest material to use.

 

Warning aside,

This is a simple router table insert that allows you to also use compatible router plates in the jess-em style (no idea if other inserts might work). (I used https://www.printables.com/model/675711-jessem-compatible-ring-inserts-for-router-lifts)

 

Lock ring dimensions:

  • 4 ¾" outer diameter
  • 3/8" thick
  • 3 ¾ inner diameter

 

 

Included is a routable template guide designed for a ¾" OD guide bushing and a ½" bit. Route to a depth of 3/8".

  • Tape template into position
  • Using a trim router, route out the inner portion of the playwood/mdf to a depth of 3/8" depth
  • Cut out a hole no more than 3 ¾ diameter

 

 

Tags