1 / 3
Remix of the stopper for the Manual reel for sewing tape made by  @Mocodroid — zdjęcie 1
1 / 3

Remix of the stopper for the Manual reel for sewing tape made by @Mocodroid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stopper Made to fit: Tape measure width ¾ inch or 19.05 mm and Tape measure width 5/8 inch or 15.875 mm

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of the stopper for the Manual reel for sewing tape made by

@Mocodroid

(https://www.printables.com/model/51369-sewing-tape-reel)

The current stopper would not fit the two tapes that my wife has. I remixed the stopper and adjusted the stopper width to 32 mm to keep it from going inside the sewing tape reel. I also adjusted the slot size to fit her tapes tight so the stopper will stay on. I made two sizes. I made the slot height 1.1 mm and the width I made .43mm wider than her tapes. This made them fit tight and they do not come off.

Tape measure width ¾ inch or 19.05 mm use stopper size = 1.1 mm x 19.48mm (slot size) x 32 mm outside width

Tape measure width 5/8 inch or 15.875 mm use stopper size = 1.1 mm x 16.3 mm (slot size) x 32 mm outside width.

I slowed my print speed down to 50% when I printed these and they printer fine.

Tagi