Remix of the stopper for the Manual reel for sewing tape made by @Mocodroid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stopper Made to fit: Tape measure width ¾ inch or 19.05 mm and Tape measure width 5/8 inch or 15.875 mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the stopper for the Manual reel for sewing tape made by
(https://www.printables.com/model/51369-sewing-tape-reel)
The current stopper would not fit the two tapes that my wife has. I remixed the stopper and adjusted the stopper width to 32 mm to keep it from going inside the sewing tape reel. I also adjusted the slot size to fit her tapes tight so the stopper will stay on. I made two sizes. I made the slot height 1.1 mm and the width I made .43mm wider than her tapes. This made them fit tight and they do not come off.
Tape measure width ¾ inch or 19.05 mm use stopper size = 1.1 mm x 19.48mm (slot size) x 32 mm outside width
Tape measure width 5/8 inch or 15.875 mm use stopper size = 1.1 mm x 16.3 mm (slot size) x 32 mm outside width.
I slowed my print speed down to 50% when I printed these and they printer fine.