Basket/Garbage clamped to the table - 70 mm clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
70 mm tall to fit my work area.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 2
- Wyświetlenia
- 136
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a remix for a really nice bin that looks and functions really well. I just have an area that required a taller vice. This remix has an area that covers 70 mm. I've also added a bolt plate to protect the surface as the screws are tightened. I did not change the size of the screws but did create a separate .stl incase you want to print them separately.
Printed in Elegoo PETG Black
I used the same settings as recommended by the original model:
NOTE: Information below is copied from the original model and yes, these are the settings I used.
Recommended print :
For basket / Garbage : PLA
0,2 layer
Wall 3
Infill 25%
For vise / clamp : PLA/PETG
0.2 layer
Wall 2/3
Infill 15% +
.....
Supports are not needed, but you can't go wrong, a sure thing is a sure thing.
.....