1 / 4
Basket/Garbage clamped to the table - 70 mm clamp — image 1
1 / 4

Basket/Garbage clamped to the table - 70 mm clamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

70 mm tall to fit my work area.

Rating
5 / 5
Likes
2
Downloads
15
Makes
2
Views
136
Reviews
2

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

This is a remix for a really nice bin that looks and functions really well. I just have an area that required a taller vice. This remix has an area that covers 70 mm. I've also added a bolt plate to protect the surface as the screws are tightened. I did not change the size of the screws but did create a separate .stl incase you want to print them separately.

Printed in Elegoo PETG Black

I used the same settings as recommended by the original model:

NOTE: Information below is copied from the original model and yes, these are the settings I used.

Recommended print : 
For basket / Garbage : PLA
0,2 layer
Wall 3 
Infill 25%

For vise / clamp : PLA/PETG
0.2 layer
Wall 2/3
Infill 15% + 
.....
Supports are not needed, but you can't go wrong, a sure thing is a sure thing.
.....