Strike Team Mask - Arcane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mask worn by the Strike Team from Arcane with functional LEDs!
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Standard Digital File License
These are the 3d print files for the mask worn by the Strike Team from Arcane with functional LEDs to light up the eyes!
Parts to Print:
1x | Mouth Cover
1x | Chin
1x | Glass_L
1x | Glass_R
1x | EyeBridge_Left
1x | EyeBridge_Right
1x | Cheek_R*
1x | Cheek_L*
1x | Handle
1x | FilterArm_L*
1x | FilterArm_R*
2x | Filter
2x | Ring
+ a circle cutout of 48.4mm from acrylic glass(DXF included if you can lasercut it!)
*Both the Cheeks and the Filter arm are printed flat and need to be warmed up to be bend in shape to fit your head shape.
Additional hardware needed:
2x | 20mm x 2mm metal reinforcement rod
1x | 31mm x 2mm metal reinforcement rod
1x | 38mm x 2mm metal reinforcement rod
2x | M3 nut
2x | M3 heat inserts
2x | M3 x 5mm Allen bolt
2x | M3 x 10mm Allen bolt
Electronics needed:
1x | ESP32-C3
1x | TP4056
1x | 1s 350mAh Lipo**
3x | 20 led WS2812 LED strip (3.5mm wide)
1x | Logic converter 3.3V to 5V
Optional:
2x | 150mm x 150mm Pieces of cloth (can also be other material!)
** Lipo's are very dangerous if not used correctly. This design place one right besides you right eye which could cause severe damage! I am not responsible for any damaged done by using this design
-------------------
Q&A:
Why is this a paid model?
Because I spend a irresponsibility amount of time designing, iterating and finishing this design to give it away for free.
How should I solder this?
Soon (next week) I will release the a diagram for soldering!