Liczymy pasujące modele…
Remix of the popular mirage planter model by Teque5. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps, which are all scaled correctly. CS:GO Wall Art Maps Collection by…
Wydruk około 12,38 €–15,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…
Wydruk około 8,87 €–10,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Everyone's favorite Counter-Strike map de_mirage turned into a small succulent planter. This particular map version is from Global Offensive (CSGO). I really like admiring this from every angle, so I put the whole thing on a small…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
The F-15E Strike Eagle, designed by Mcdonnell Douglas, is a multirole strike fighter derived from the F-15 Eagle. it was made to carry out strikes (who could have guessed) deep in enemy territory without fighter escort. Both Sprue and…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Keychain with headshot logo.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
Alternativ Versions: All Butterfly Collection Update Version 2: Made a Multi Material version New pins for the blade New separator for the handle (will also snap in, so no glue needed) Optimized position of the blade pins for better…
Popular well with CS2. I also created a remix where the blade can be printed separately. Without AMS.
Slaughter version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin should stay in place by friction. The original Blade is…
Description Counter-Strike 2 CS2 Butterfly Knife Replica. No screws are needed! Note: The blade is split into two parts so it can look realistic on both sides. A glue is required to attach both parts together.
Printed at 0.2mm layer height with a 0.6mm nozzle on my MK3S
Key caps for mechanical keyboards for CS:GO players. I took the model below as an example and redesigned it to be able to print it in multicolor. https://www.thingiverse.com/thing:3001317 For better results, I recommend 0.25 nozzles, but…
Version 2.0 Changelog A new rulebook, much more in depth, has now been released, including some rule changes and updates. A free companion app (credit to makermike99) is now available to help you keep track of everything during your…
I designed this actuator to use a common push-push latch with my Magnetic IDEX DIY 3D printer Link to Push Latch: https://amzn.to/3P1Hbwc Push-Push Latch CAD Model NOTE: The original download link/URL is broken. Added the complete STEP…
Damascus Steel version of the Butterfly from Counter-Strike. The separator and the pin should stay in place by friction. The original Blade is quite hard to print, so I made a version with a duller blade angle to reduce the overhang. The…
LEGO Counter-Strike Weapons
This is the iconic de_dust2 map from the counter strike videogames by Valve. This is a remix of a model on thingiverse by Frenzaih. I only added the walls... Original model: https://www.thingiverse.com/thing:4750803
door strike plate spacer Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .2 Infill: 20 Notes: adjust Z height in splicer for the thickness you need Category: Household
Editing my model in 2 parts so that the blade can be printed separately.
Store and sort your Alpha Strike cards Should fit sleeved cards Optimised filament use and printing time. No supports need, all prints on 1 build plate.
This is a simple design crafted and iterated over a day to find a suitable organizer when playing Battletech: Alpha Strike. I use 16mm movement dice to display the TMM of a mech, and thus I wanted a way to keep the facing correct on the…
Dran Strike bursts onto the scene as a bold next step in the evolution of the Beyblade X , signaling a possible new standard under the BX Infinity line. While the full product name has been revealed as Dran Strike 4-50 FF. What truly…
Updated 5/5/23 - Added rear hole to allow use in Shellstrike. Main dart diameter changed from 9/16" to 17/32" to more accurately mimic real life shell. Fillets also cleaned up to look nicer. Works just like the one that came in the box.…
This attaches in place of the metal strike plate on a door jamb. I created it to hold the door open enough so that there is better air circulation in the room so that the HVAC can work more efficiently. And it keeps the pets out of the…
The well known RepRanger is now free for all! Pooch from Repkord commissioned me to design this piece back in May of 2019 to use as a promotional item for his BattlePak filaments (seen in the photo of the prototype, and they make the…
Model includes the grip itself and .3mf file With modifiers for adding fuzzy skin for grip already contained on the model. Highly ergonomic grip designed for easy 3D printing, uses the same grip angle as the Magpul MOE K2 grip along with…
This is a Maverick N-Strike Barrel Attachment Muzzle, which, once installed, allows N-Strike Style barrels to be attached to the Maverick. It replaces the existing muzzle, which can be removed after the blaster is taken apart. This muzzle…
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
If you dont have a printer on hand, you can buy the part from my website .
Battletech Alpha Strike gaming ruler Works for any table top game Ranges: 1" 2" 4" 8" Catapult Mech logo Trigger finger guard to cowboy spin when landing those crits Optimised filament use and printing time. No supports need, all prints…
This is a fun game that is basically unavailable where I live this is my print and play version of it. The dice in the photos are 12mm. See it played and learn the rules here https://www.youtube.com/watch?v=HWSNrysORjA Printed with 10%…
Design Concept The Deadpool Katana Strike figure captures the dynamic and playful nature of the beloved anti-hero, balancing on an artistic smoke effect design while wielding his iconic katanas poised for action. The design ensures a…
Ich habe für ein BIC Feuerzeug eine Hülle designt, mit einem "CS2 (Counter Strike 2)" Schriftzug. Ich hoffe euch gefällt es. Wiel Spaß beim drucken. I designed a case for a BIC lighter with a "CS2 (Counter Strike 2)" lettering. I hope you…
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
I really enjoyed @PhabulusPhantom's kit cards for my kids and wanted to add some improvements to this F-15e model to help it fit together better (and stay together as they play with it). I added tab and notch features to the mating parts…
This is a Slide Replacement and Stock Attachment Point for the Nerf Maverick. It uses the 3 small screws as well as the N-Strike Attachment nub and spring from the stock slide of the Nerf Maverick. It features a N-Strike compatible rail…
Slip this dust box behind the strike plate on your door frame to give it a neat and clean look. This hides any imperfections in the recess and stops dust from migrating out of the wall cavity. The Fusion 360 (F3D) file is fully…
I wanted a custom strike plate for an outside door that I have that was marking up the door frame because of how it was installed. It had to be longer than standard with a custom spacer. I did find some strike plates already on…
The Qu.A.S.A.R. is another of my original creations. For use with 4 inch action figures like modern G.I. Joe. I created this about a year ago and used it as an experiment in “greebling” a vehicle it was a lot of work but I enjoy how it…
This is a remix of @JahnRoux Throw Lever, redesigned for the Vortex Strike Eagle 1-8x24. It's adjusted in inner diameter and grove count to provide a perfect fit for the magnification ring. Fits like a glove, perfect snug fit! Same…
This is an N-Strike buttstock adapter for the X-Shot Pro Fury X. Requires 2 M4x30 nuts and bolts. M3x50 ish should work for the rear section but it works fine without. Print vertically, with supports. Thank you to the original creators…
Thanks for checking out my design! This item is sold fully assembled on my Etsy store: https://www.etsy.com/listing/1743017114/nerf-n-strike-folding-stock-adapter?ref=listings_manager_grid You will need some Loctite superglue and a ~9mm…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to closely resemble the Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
The free top rail for the Aeon Pro X is now here! And Now you can have a full picatinny top rail with your Aeon Pro X after you install a pump kit! It is easy (though tight) to install and can be removed just as easy, but will not come…
This is a replacement muzzle for the Nerf Stryfe X that gives it an N-Strike barrel lug so it can use Nerf barrel extensions. For printing this part, I recommend orienting it muzzle down and with tree supports for the best results. If you…
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
A simple adapter I made to fit a Dart Zone Nexus Pro stock onto my Stryfe, since the one it came with was too small. It could work with other flywheeler stock attachment points and possibly airsoft stocks, though I haven't tested them out…
Couldn’t find a simple stock that I liked so I made one. 213mm long (21.3cm). Strong despite being PLA with only 15% infill! Easy to print. Friction held, but removable. Feel free to remix. plz like and post a make! it encourages me to…
The latch on my patio screen door had been broken since I moved into my new place. Over the weekend I finally got around to modelling a replacement. Since all I have of the original is a broken base, I have no idea if this is a truely…
Created something silly yet simple for spring-modded Nerf blasters, as the full-length darts flew everywhere after the FPS increase. I was surprised it wasn't made yet, so here we go again. I took the model of the Nerf Delta Muzzle from…
This gives your Nerf Fortnite AR-L/AR-E an N-strike stock attachment point. It is a drop-in component, no shell cutting required. Simply disassemble the blaster, unscrew the pusher return spring, replace with these parts, and screw the…
I loved this Scope but I wanted a version without the piggyback reflex.
A simple doorknob strike plate with a 1mm recess on the back for adhesive foam mounting tape.
Just a simple way to protect your wall from those dreaded doorknobs. I printed mine in white Overture PETG at 15% infill and it took roughly an hour.
Cool CounterStrike Coin that has a cavity for NFC Tags inside. Can be used as a personalized LAN Party token or similar. Prints good in PLA on the MMU3. Activated Ironing for the Top Surface for a better Coin finish. For the NFC Part that…
I took the blitz files into fusion 360 and added a stock point to the top. If you have any feedback for the model, i would greatly appreciate it
Deep Strike 9-Inch and Embark 3-Inch markers for 40K or similar games. You can print in two colors, doing a "filament change" at a specific layer. Check my other designs for the 3-Inch "Embark" marker. Mirror from…
My take on the buffer tube stock adapter. you'll need a ballpoint pen spring cut in half, and 4 M2.5 (self cutting) or scavenged nerf screws. does not fit on most springer blasters due to the extended lug.
Originally made for a friend of mine, this pop-on cap is designed to fit onto a NERF N-Strike CS-18 blaster battery housing. My friend upgraded his Nerf gun to use a NiMH battery instead of the stock battery set up, however the stock…
Created something silly yet simple for spring-modded Nerf blasters, as the full-length darts flew everywhere after the FPS increase. I was surprised it wasn't made yet, so here we go again. I took the model of the Nerf Delta Muzzle from…
Remove the battery cover (keep the screw) and screw in the new stock. It may not be a perfect fit, so some cutting with pliers may be needed. Not very practical and kinda short, but still cool. Note: Firestrike laser won't work with…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Funcional Airsoft grenade launcher parts for my replica of xm148. I chosen a different style of mechanism for this project. This gun using striker system thats not common for airsoft launchers. I dont know if it is a batter system or not…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Chambers and barrel get misaligned → no shooting possible.…
Wanted a simple mount to mount my Garmin Striker 4 fish finer to my boat. Was not able to find anything that attached directly to the Striker 4, so I design this. Works well and holds the Striker 4 very securely. You need to print either…
Adapter to use a different PCIe riser cable with the non-standard screw pattern in the Antec Striker case. Designed and tested with the LINKUP - AVA5 PCIE 5.0 Riser Cable but will likely work with others. Fusion file included for tweaking…
The original handle broke, so I recreated this one by replicating the design. Handle Restores functionality V1-TESTED WORK V2-NOT TESTED i fix some dimennsions there
Additional pieces for the excellent https://www.printables.com/model/965141-vase-mode-terrain-planetstrike-bastion/files Adds 1-sided versions of the base and tower, and several versions of the 2-opposide-side base and tower with corner…
This is my first model I'm publicly sharing so please feel free to let me know if there is anything that would be a good change for it. This is a Battletech Alpha Strike Mech Dashboard, it allows tracking of Armor, Structure, Pilot skill,…
Miniature reproduction of the iconic AK-47 from the video game Counter-Strike, made of high-quality PLA+
Adapter that allows the use of picatinny stocks on blasters with a N-Strike stock attachment point. Recommended Print Settings Infill : 25% Gyroid Walls : 6 Nozzle : .4mm Layer Height : .15mm Support : Yes Print horizontal for cleaner…
WARNING: UNTESTED I haven't printed it as my mouse hasn't arrived yet, so I'd be happy to get some feedback in the meantime! I am by no means a designer, just a tinkerer, so this could be rough.
I loved this Scope but I wanted a version without the piggyback reflex.
Capture raw atmospheric power with this Storm Cloud with Lightning Strike , a dynamic weather-effect model designed to bring energy and drama to your displays. A dense, swirling cloud mass hovers above a jagged lightning bolt that crashes…
To complete this Fishing Rig you will need: 8x M4x6mm heat-serts 8x M4x16mm bolts 2x M3x16mm bolts 2x M3 nuts The M3 hardware is for the two power wire wraps I used button heads but pretty much anything will work. You also need the…
This is a replacement base for the Garmin Striker. I couldn’t find one available online, so I designed and made my own to create an ice fishing setup using the same Striker unit I use on my boat. I mounted it to a case, allowing the…
a way to let your nerf hobby barrels have an n-strike barrel on them
This plunger head and grip combination allows for better performance and priming action. It takes about 50 min. to print and less than 5 min. to assemble. All you need is one M3X16-20mm flathead screw, any O-ring that is 2.5 mm thick, and…
It allows the Little Rocket Mighty Mama to attach to nerf N-Strike rails
This is a router guide for making repeatable and quick holes for door strike plates. Center to center spacing between the holes is 5.5", refer to picture for more dimensions. Available in left or right versions for inner or outer opening…
The sliding door striker receiver on the Toyota Proace (2015, L2H2) is a plastic part that tends to crack over time, causing the sliding door to not latch properly. This is an exact replacement part that can be printed at home and…
This is a dart shield that improves cosmetics so that you can fight with style. Supports needed. Enjoy!
A parametric door latch/strike plate with a hole for the latch. You can modify the freecad params.
This is a tool and accessory holder for the Shark StainStriker HairPro Portable Carpet Spot Cleaner (Model # PX251, but may be compatible with other variants). It holds the 3 different heads, plus the alternate mini brush. Printed on a…
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a remix of BlueChromis's Lightning token, raised instead of cut…
This is a simple yet accurate and cool sight inspired by the absolute solver from the show murder drones. Print with front facing down. If you want picatinny go here:…
Washing machine door latch part number WH10X10004, 131763302 or 131763310. Fits GE, Frigidaire and probably more.
![Beyblade X Bit: Free Flat [Dran Strike]](https://media.printables.com/media/prints/7617f053-fc36-4935-8f1b-23c0dd64a974/images/12043463_f106a2c0-3199-4485-a01b-6a27f8bd28d8_a1b4296b-250d-4b6e-8ae3-9df105fc5f5a/ff2.png)
![Prism Arms - K-Industries "Strike" Pistol Grip [For VFC M4/AR GBBR]](https://media.printables.com/media/prints/42f3c46a-42cc-4d5a-a297-383f5528edea/images/10361191_bdee274f-2411-454e-aa6d-c79876cb6740_4e4cba5b-2a49-41be-950f-53fbb70cb871/20250731_102105.jpg)
![#0031 [Remix] F-15e Strike Eagle Kit Card (no sprue)](https://media.printables.com/media/prints/243228/images/2344163_de2cae34-5e52-4ad2-bbe1-ccee9c5b642a/f-15e-pic2.jpg)
