1 / 7
Spulentellerauflage und Adapter 75mm für Vertex K8800 — zdjęcie 1
1 / 7

Spulentellerauflage und Adapter 75mm für Vertex K8800

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filamentspulenadapter und Wickeltellervergrößerung für Velleman Vertex K8800. Die Wickeltellervergrößerung ist so…

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
202
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Filamentspulenadapter und Wickeltellervergrößerung für Velleman Vertex K8800.

Die Wickeltellervergrößerung ist so konstruiert, das diese auf dem originalen Wickelteller spielfrei und leicht klemmend sitzt.
Ich habe in die Löcher O-Ringe im Format 22x3,5 mm eingelegt, sodass die Filamentspule damit gebremst wird.
Die leichte Erhöhung verhindert, das Spulen, die etwas deformiert sind, am Druckergehäuse schleifen.

Ideal in Kombination mit der Filamentführung https://www.thingiverse.com/thing:470526,
wie auf den Fotos zu sehen.

Der Adapter passt genau im Lochkreis zu den O-Ringen und hat einen Durchmesser von 74 mm. damit liegt die Filamentspule von Eryone schön zentrisch auf dem Teller auf.

https://www.thingiverse.com/groups/vertex-k8800

Filament bobbin adapter and winder plate enlargement for Velleman Vertex K8800.
The reel plate enlargement is designed so that it sits on the original reel disc without play and with a slight jamming action.
I have inserted into the holes O-rings in the format 22x3, 5 mm, so that the filament coil is braked.
The slight increase prevents the coils, which are slightly deformed, from rubbing against the printer housing. Ideal in combination with the filament guide https://www.thingiverse.com/thing:470526, as seen in the photos.
The adapter fits exactly in the bolt circle to the O-rings and has a diameter of 74 mm. so that the filament spool from Eryone is nicely centered on the plate.

Print Settings

Printer Brand:

Deltaprintr

Printer:

Deltaprintr Kit

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0,2

Infill:

40%


Filament:

OWL PLA Melon Yellow , Various

Category: 3D Printer Parts

Tagi