PASTA Lite 37mm motor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adding a motor to KYZ Design's excellent PASTA Lite.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the parts of the bracket made by Tom Cichowicz for the PASTAMATIC to adapt them to KYZ Design's PASTA Lite.
I've made the same bracket compatible for 37mm motors with centered or eccentric axis.
Assembly will require 2 M6x50 bolts, 2 M6 nuts and 4 M6 washers.
You can use mirrored mount for motor with shorte axis for exemple.
I've reused the power supply and base from an old Petamentor (to recycle plastic bottles into filaments).
So for the various electrical components and their assembly (PSU, dimmer), I suggest you follow Tom Cichowicz's instructions for motorizing the PASTAMATIC.
Support not needed. PLA possible, but PETG preferred (3 shell and 30 infil gyroid).
I hope you find this useful!