Liczymy pasujące modele…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
A handy strainer for pouring out the water after cooking pasta, rice or vegetables. Easy to just rinse after use, keep on a hook near the kitchen sink. It comes in three different sizes: a small version for pots up to a diameter of 18.7…
NOTES: 3D printing isn't a food safe process, filaments have unknown additives and colouring chemicals, brass nozzles can contain lead, and layer lines are shown to trap bacteria and cannot be adequately cleaned; as such this design is…
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
I created this pasta hanger using square chopsticks with 7.5 mm edges. Please make sure that it's mounted in a place so that nobody can get hurt by the tips of the chopsticks!
Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…
The holes are sized for #8 wood screws. Designed to only need supports for the large hole in the rear. Printed with 10% infill.
These are additional parts for using the PASTA lite Receiver with thin spools (25-30mm). Print the replacement lead screw and any one of the spacers using the same settings as the original…
(EN): Stop wasting toothpaste! This shark-shaped squeezer slides onto the tube and pushes every last drop out. Universal Fit: Works with standard toothpaste tubes (up to 65mm wide). Shark Design: Fun and functional aesthetic. Quick Print:…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
NOTES: 3D printing isn't a food safe process, filaments have unknown additives and colouring chemicals, brass nozzles can contain lead, and layer lines are shown to trap bacteria and cannot be adequately cleaned; as such this design is…
After using the PASTA Lite Receiver – a Pastamatic Remix ( https://www.printables.com/model/1162052-pasta-lite-receiver-a-pastamatic-remix ) and the Doner Spool Roller (…
Lustige Katzennudeln für die Kids oder Katzenliebhaber die eine Pastamaschine von Phillips besitzen.
A 240 handle for the extrusion mod for pastamatic. just print without supports.
I initially fixed the wobbly gear in the slicer but 2 years later (ie tonight) it stripped. I had no idea where that gcode was … so I imported the gear into FreeCAD and made the key bigger. The 3mf is a tight fit … but the FreeCAD files…
Cup for measuring one or two portions of (dry) pasta. Filled to the mark the cup holds about 125g of dry pasta, filled to the top is about 250g. We use Fusilli mostly.
Holes added on the bottom for M4x8 threaded inserts
Created an enclosure for the 37mm motor mount used in GekoPrime's original motor mount remix. Added mounts for a DC controller and 12v power supply. Parts list: 37mm motor -…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
ITALIAN PEN HOLDER Brighten up your office with this Italian pen holder. Below are some rules to follow, mandatory for printing: Ketchup is not allowed. Never break spaghetti. Fettuccine Alfredo is not an Italian dish. Distinguish between…
Noodles rack to dry the fresh italian pasta (e.g. tagliatelle or pappardelle). The rack may be completely disassembled for easy storage. The arms are printed with XT food grade material because are in contact with pasta UPDATE 22 March…
Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…
Simply insert a short piece of filament and melt both ends to assemble.
Un modelo con agujeros para colgar con tornillos y otro modelo sin agujeros para colgar con cinta de montaje de doble cara.
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
For Printopia 2024 we had a Starwars and Spaceballs theme. So I designed a thumb lightsaber arena to battle with the Printopia visitors! Print Settings Supports: Yes Resolution: .15mm - 2mm **Infill:** 15-25% Filament: Protopasta HTPLA…
This is the gear where the dough is pressed. In the .f3d file, the gear can be scaled to fit perfectly. In the case of the STL file, it is scaled to 1.01 in Fusion 360
Ho fatto questo modello stampato in PETG con un riempimento del 30%
Stampato in PERG con riempimento 40%
I make my own pasta sometimes and I wanted to buy a stand for drying spaghetti (or storing it until boil it say the other day). Commercial kitchen stuff is crazy expensive (30€) for what it is - basically a few rods connected together,…
The Pastamatic gear cover will protect your gears from debris and your filament from grease slinging. Greased gears improve their longevity and reduces friction, and the gear cover also protects your gears from a accidental spool drop,…
The philips pasta maker comes with 8 moulding attachments, but it's internal storage, stores just 5. And when you buy another moulding attachment you need to store them to.
hand crank for pastamatic a spool of bambu filament got away from my sister, and now needs to be respooled. she wanted a hand crank, so I designed this one. in particular, I wanted it to be easy to print and not require any extra hardware…
These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…
Monedas Pastafaris, la diferencia entre ambas es el grosor. El pez pirata es la cara que va abajo al imprimirlo.
Halter und Becher für Zahnbürsten und Zahnpasta. Für 2 Personen Vom design her passend zu Seifenschale → https://www.printables.com/model/1050877-burstenseifenschale-mit-wandhalterung
This is a remix for the remix of Pastamatic's filament spool winder for 3kg or 300 mm spools.
I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…
This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…
Kitchenaid Pasta roller attachement storage helper. I created this to be able to store the pasta roller efficiently near my kitchenaid. v1 is the one on the pictures. v2 ATTENTION! This is not tested! I improved v1 to make it a bit…
KitchenAid Pasta press tagliatelle form Print instructions Category: Kitchen & Dining
gears that fit inside the pasta attachment for the KitcheanAid, the are a tight fit in the roller shafts (no glue needed). designed in FreeCAD, I used PTEG for strengths , they have held pretty well so fare after a few months of use.
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Vertical stand GVODE (and possibly others on amazon) 3 in 1 pasta roller attachment
Create festive ravioli effortlessly with this unique mold! Perfect for Christmas gatherings or other special occasions. Simply lay one sheet of dough onto the mold, insert filling in the well, put on a second sheet, flip and press. The…
Introduction Fully printable print-in-place sleeve bearing set for PASTA lite version 0.3 or earlier as well as the OG Pastamatic . For PASTA lite Receiver version 0.4 and later , the printable gear and bearing set will be included in the…
Kleiner Halter für die Zahnheld Zahnbürste mit extra Platz für Zahnpasta und das Zahnheld Ladegerät. V2 ist ohne gesonderten Platz für die Bürste, sodass sie immer auf dem Ladegerät Platz findet. Little bracket to hold the Zahnheld…
I changed the gap between the Target & passive Cradle from 0.3mm to 0.05mm gap. That was a nice fit for me. I added a test print for 0.05mm gap & 0.10mm gap as Cradle_Mod_05_Test.stl & Cradle_Mod_10_Test.stl . You will need to have…
Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…
I killed 2/3 pasta rollers in my set, which prevented me from making pasta. Well, it didn't, but it was really annoying to do by hand, and it meant I could only have fettucine. So I designed a new shaft for these - it should be…
The original driven shaft shows some signs of wear in the screw part, so similarly to the remix of the driving shaft , I created a remix with a reinforced screw part and the "top" end of the cone.
This 3D model is a modular heart-shaped pasta cutter, perfect for creating romantic Valentine’s Day ravioli or other pasta shapes. The design consists of three parts: handle , screw , and base , allowing you to mix and match with other…
I didn't find a spaghetti measuring tool during a trip to the shops, so I decided to make my own. A simple design that's easy to print, use and store. Provides spaghetti portion measurement for 1-4 people. Print > Cook > Eat > Enjoy!…
We designed a pasta themed clicker! Print Settings Rafts: No Supports: Yes **Resolution:** .16-.2mm Infill: 10-15% Category: Mechanical Toys
My partner needed a compact pasta dryer to go with her new pasta machine. At first, we were being savages and using a clothes horse. We checked out some options online, but since I love making things myself, this felt like the perfect…
Stores two pasta cutting attachments for your KitchenAid. It's tight enough to prevent them from falling over e.g. in a deep drawer.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
A First attempt to make a pasta maschine out of a meat grinder. Just insert a 3dprinted stencil. Its a meat grinder
Gear for Planetary Mixer Lidl SILVERCREST SKMP 1300 C2 - Ingranaggio per impastatrice planetaria Lidl SILVERCREST SKMP 1300 C2 All our designs are free to download and use—because sharing drives innovation. Your support fuels our…
This is a simple inner ring adapter for the ProtoPasta cardboard spool, which reduces friction during rotation on a center rod for auto-rewinders and similar devices. MAKERS: Please post a picture with comments here of any prints/makes…
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…
I needed to hang fresh pasta, but I didn't want a gadget that would take up too much space. So I decided to make these stackable cylinders, which together with chopsticks and the base of a kitchen paper holder, quickly become a pasta…
Zahnpasta-Schieber – Hol das Beste aus jeder Tube! 🦷✨ Mit diesem praktischen Zahnpasta-Schieber kannst du die letzten Reste aus der Tube herausdrücken – ganz ohne Kraftaufwand! Kein unnötiges Quetschen mehr und weniger Verschwendung! 🔹…
I really liked the idea of this crossbar remix, but I already printed the original pastamatic crossbars and didn't want to waste filament in printing entire new ones (yes I'm cheap :P ). So I modeled some clips to glue in place manually.
I created this because I happened across a great deal for 10 kg spools that had some humidity and couldn't fit them into my dehydrator. This model is an addition to the Pastamatic winder that latches on just like the original unspooling…
Simple Rings to use PastaLite to actually refill your sunlu refillable spool If you need an adapter for any other spool, I have added a FreeCAD file, which you can quickly modify by changing the 2 parameters in the spreadsheet
I modified the parts of the bracket made by Tom Cichowicz for the PASTAMATIC to adapt them to KYZ Design's PASTA Lite. I've made the same bracket compatible for 37mm motors with centered or eccentric axis. Assembly will require 2 M6x50…
Organizes the KitchenAid Pasta Maker disks Not a remake, but the general design idea was taken from https://www.printables.com/model/962532-pasta-disc-storage-for-kitchenaid-gourmet-pasta-pr/files I hadn't noticed that there also was a…
Ich habe einen Adapter konstruiert damit man beim Pastamatic auch die Konstoffrollen von SUNLU benutzen kann
*NOTE* I managed to print it and it fits, the rollers will also move when you turn the machine on. It is not yet tested with actually making the pasta, i hope to do this soon. UPDATE Used it and the fully printed PLA does not hold up to…
This is a slightly smaller version of the bearing latch Kistek created. This will only fit the lead screw shaft opposite of the gear side. This still uses the same 608 skateboard bearing. And requires one of the original Pastamatic pins…
this model was inspired by the bead contest. this is only my 4th model so I am not planning to win. but either way this is a small piece of pasta. I made it in blender and I do not have a 3d printer so if it has any errors please let me…
This is just a pasta serving measurer that I thought would be a bit faster/simpler to use -- complete with a hanger so you can hang it right beside the spaghetti container for convenience. Hanger comes with either a standard 5mm peg or a…
I'm not big on printable hardware - there's nothing wrong with it, but I've got a tonne of hardware so I might as well use it. For the main body, you will need: 14x - M4x6 heat-set inserts 8x - M4x20 bolts 6x - M4x30 bolts (you can get…
A colander ("pasta sieve") with 360 holes and two handles, printable without supports. Intended use is as toy only, I don't recommend using it for actual food for hygienic reasons (see…
My 500g cardboard spools kept getting bucked off of the Bambu AMS during printing. So I threw this together to hold desiccant or some weights, or you can just put whatever you want in it. Works great with the AMS so far, I live in a humid…
Print twice for one 500g spool at any layer height Instructions: Peel/tear off one side of the filament spool Use a blade to remove the extra glue at the edge Press-fit one adapter Flip over and repeat
I suggest making the perimeter 10 layers thick with a 25% infill
The Kitchenaid Pasta roller attachment is useful but after time is gets dirty and the temptation is to put a rag or other object in to clean the rollers whilst its running. This can lead to a jam and to stop the main machine self…
The lid that came the my jar was made of wood and stinks for some reason, so i made this.
Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.15 Infill: 100 Filament brand: eSun Filament color: Yellow Filament material: PETG
The disc should be printed with the face (where the pasta comes out) on the bed. So be careful with the first layer.
Pastamatic Skadis Halter gedruckt in Sunlu PETG Schwarz Skadis Halter für “Pastamatic Filamentspulenwickler für Bambu X1C/P1P AMS” von GekoPrime
Just twist the cap to one of three positions (1 serving, 2 servings or 3 servings) to dispense just the right amount of spaghetti, linguine or angel hair pasta. Or twist to the closed position for storage. The body splits in two for easy…
I was making pasta but didn't know how much I had to make for one person. So online looked up the diameters and created a tool for it. It can measure 4 serving sizes of spaghetti: 1 to 4 servings and a hole to hang the tool on it. You can…
