Pastamatic Driving Shaft - Reinforced
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced version of the Pastamatic Driving shaft
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 293
- Wydruki
- 3
- Wyświetlenia
- 1370
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin.
So, I created a remix, which has a reinforced screw and the "top" end of the cone.
I printed it with 25% Gyroid infill and added a modifier at the bottom, specifying that the teeth section is printed with 100% Concentric infill (as per the original).
Update 20231228: Added image of the broken original driving shaft.
Update 20240501: Added STEP file.
Update 20250127: Reinforced version of the driven shaft is also available.