Liczymy pasujące modele…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Untested work in progress
Created an enclosure for the 37mm motor mount used in GekoPrime's original motor mount remix. Added mounts for a DC controller and 12v power supply. Parts list: 37mm motor -…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
This is an barely tested mockup, it seems to work fine but I haven’t run a full spool through it Here’s a link to the motor. I used 8mm m3 screws. https://www.amazon.com/Greartisan-Electric-Reduction-Centric-Diameter/dp/B08D3SSG55/ I…
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
Crossbar remix
Hand Crank for the Pastamatic Manual crank for the Pastamatic Filament Spool Winder Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c…
The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.
EDIT 02-Sep-2025 : New revised motorized and furthermore engineered version published: https://www.printables.com/model/1398207-re-remodel-of-pastamatic-filament-spool-winder-for EDIT 20-Aug-2025: in a couple of days there will be a new…
To do: Change spool_max_ID in the main project so this shim isn’t required
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … You need 4 of them and a wood board (mine will be…
Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…
Speed Control DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B NEW Drive Gear The NEW drive gear that has a closer tolerance for a press or tighter fit to the motor shaft. Spindle retainer…
For better seating …. V2.1 Small Clamp has been reinforced
Bendy PETG wiper blades for Pastamatic
Print in place rotating handle allows a tight grip, it rotates in your hand.
Adapter rings that allow the use of spools with up to 83 mm inner diameter [Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS]
This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…
had issues with the leadscrew binding so i added a place to add an extra bearing
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
We could not get the TPU wiper to slide into the slot more than half an inch. Shaved a bit off the bottom bulb diameter, now slides in snugly.
Added a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works. Requires supports in the gap where the spindle meets handle Crank handle was taken from…
I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…
These simple brackets allow side rails to be screwed down in a permanent position. Printed with PLA, I used 50% infill for addition strength. I just glued to side rails. but they could be bolted to rails. I added four, one in each corner.
These cotter pins were a came changer for me. I was having pin vibrating out while in use before. Now they are locked in! Edit: Made a long pin with the hole moved closer to the tip if you wanted to use the clip mod for the drive spindle.
also got this idea from https://www.printables.com/@Leo_1098206. i however don't have or can't find a 2.5kg spool which his what his particular remix is for. 5mm countersunk screws should fit fine.
60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…
hand crank for pastamatic a spool of bambu filament got away from my sister, and now needs to be respooled. she wanted a hand crank, so I designed this one. in particular, I wanted it to be easy to print and not require any extra hardware…
for slim spools like the old Makerbot spools.
The "x2" in the file name refers to the number of printed parts. Depending on whether the coil is receiving or giving coil, you have to insert the corresponding adapter (with or without teeth), and glue it in (I use super glue for gluing…
有效防止使用双电机MOD时，卷线时的跳轴的现象 机翻：Effectively prevent gear runout during operation when used the dual motor mod Hardware： 1X 608ZZbearing 1X M5X35Scerw and nut 2x M6X50Scerw
Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…
I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the…
These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…
Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin. So, I created a remix, which has a reinforced screw and the "top" end of the…
Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.
You'll need: 1)Motor+controller (12V/375rpm and package C): https://aliexpress.ru/item/1005002607864635.html For russian region:…
Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…
My single motor just didn't have enough torque when the spool was more than halfway loaded so I remixed this setup for my controller and a dual motor setup. EDIT:added step files EDIT: Use this as well…
Remixed the enclosure for a different motor controller https://www.amazon.com/gp/product/B071H2YQG5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Erhöhung um 20mm um DasFilament Spulen mit 2,6KG zu verwenden
Spool tension wipers kept sliding back, with these spacers you can set tension. printed with PLA, 5% infill 12/4 Added taller version for better support
This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…
This is a remix of Pastamatic's filament spool winder that I have adapted for a taller/larger source spool. I wanted to be able to fit my 2.2 kg spool that has a 300 mm diameter. Replace the 2x source cradles with 2 of this. Apologies, I…
Stl:s now with mounts for 3030 rails…
Same spindle, stronger socket.
Work in progress, don't expect this to work without modification Post a comment if you see a better way to do this. The idea is to spread friction across the entire surface of the spool so it doesn’t saw through the PLA as quickly. With…
The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle
I created a square with 9.7 mm. Perhaps it could be made a bit tighter.
Expect a snug fit on the drill bit, especially with PETG.
I have had the problem, that some of my spools had a hole Diameter up to 85mm which causes the normal pastamatic axis to slip throught this hole, so I quickly designed a adapter that enables me to respool to/from this kind of spools…
English Description of the 3D-Printed Adapter for the Pastamatic Spool Winder and Bosch IXO Cordless Screwdriver: This 3D-printed model is an adapter designed to connect the Pastamatic spool winder with a standard Bosch IXO cordless…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
Print 100% infill. I've used PETG because it need to be flexible. Mount between the adapter and the spool winder as you can see in the image
I stretched the heigth of the cradle, so i could fit even the largest diameter Extrudr Spools (diameter up to 350mm), adapted the contour accordingly and added some aesthetically pleasing holes to spice up the walls. Print the part twice,…
2 m4 or m5 screws with nuts. No support. Choose between 3030 or plate mounting, according to your needs.
The Crossbar used to fix each end is too loose for my liking. Use M3 bolts and nuts to secure the crossbar to each cradle. Orientation Print as it is, no support is needed. BOM 4 x M3x12 4 x M3 Nuts (6 for each if intend to fix the wiper)
Print with no support, PLA or PETG.
HQ-Preview videos https://fatalsoft.de/videos/pastamatic.mod.02.mp4 https://fatalsoft.de/videos/pastamatic.mod.03.mp4 Link "Pastamatic - 37 mm motor mount remix"
I changed the gap between the Target & passive Cradle from 0.3mm to 0.05mm gap. That was a nice fit for me. I added a test print for 0.05mm gap & 0.10mm gap as Cradle_Mod_05_Test.stl & Cradle_Mod_10_Test.stl . You will need to have…
Simple clip to hold down the shaft when using the drill, one less thing to worry about. Enjoy!
Modified model of PASTA lite Receiver - a Pastamatic Remix to use 608zz bearings on the filament guide section. Designed to make filament rewinding quieter.
I was not happy with the amount of backlash in the leadscrew block on my respooler. So I modified the stock block by adding a threaded hole. You will need a M6 setscrew around 10 - 20mm long. You will also need to drill a hole in the…
Holes added on the bottom for M4x8 threaded inserts
i didn't like how the drive spindle struggles to stay centered, especially when you are pushing on it with a drill.
No support needed print 4 walls also print retention clips so spool holders don't fall out
A few modifications to allow the Pastamatic to be used for 1kg and 5kg spools. I raised the height of the source spool by 35mm with a wider smooth bracket riser, but it fits in the same area. The crossbars, target spool female threaded…
Longer gear and donor spindles for Pastamatic Winders. They are useful for 3kg spools(~120mm wide).
I made this in PLA, but you probably want to use PETG or ABS for better durability.
This is a remix for the remix of Pastamatic's filament spool winder for 3kg or 300 mm spools.
The original driven shaft shows some signs of wear in the screw part, so similarly to the remix of the driving shaft , I created a remix with a reinforced screw part and the "top" end of the cone.
Ho fatto questo modello stampato in PETG con un riempimento del 30%
I am mostly using parts from https://www.printables.com/model/501307-pastamatic-37-mm-motor-mount-enclosure to add a motor to the pastamatic base design, but I found a couple issues that needed tweaked models. Parts I found that needed…
I'm not big on printable hardware - there's nothing wrong with it, but I've got a tonne of hardware so I might as well use it. For the main body, you will need: 14x - M4x6 heat-set inserts 8x - M4x20 bolts 6x - M4x30 bolts (you can get…
The Pastamatic gear cover will protect your gears from debris and your filament from grease slinging. Greased gears improve their longevity and reduces friction, and the gear cover also protects your gears from a accidental spool drop,…
Ich habe einen Adapter konstruiert damit man beim Pastamatic auch die Konstoffrollen von SUNLU benutzen kann
I created this because I happened across a great deal for 10 kg spools that had some humidity and couldn't fit them into my dehydrator. This model is an addition to the Pastamatic winder that latches on just like the original unspooling…
Printed from PETG 0.4 mm nozzle, 15% cubic infill, 3 walls
I made this so that I could reduce the size of filament cores with large centers (74mm) so they will fit the Pastamatic. The Pastamatic operates at high speed so a tight grip on the roll was paramount, I added 4 padding/friction groves so…
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…
I really liked the idea of this crossbar remix, but I already printed the original pastamatic crossbars and didn't want to waste filament in printing entire new ones (yes I'm cheap :P ). So I modeled some clips to glue in place manually.
Large Spool Holder fitting most spools including standard 1KG and large 5LB and 9LB spools.
Da auf der aufzuspulenden Seite immer eine Bambulab Spule ist, ist ein Adapterring unnötig.
This is a slightly smaller version of the bearing latch Kistek created. This will only fit the lead screw shaft opposite of the gear side. This still uses the same 608 skateboard bearing. And requires one of the original Pastamatic pins…
The electronics box was too small for my application as I wanted a larger unit that has a reverser switch. I designed a larger power box to support this. You will still need the other components to make functional. The controller and…
As add-on of my earlier posted a motorized winder which was a remake / remodel of @GekoPrime's spooler I now add a revised LeadScrewBlock. All of these files are also in my original post:…
I initially fixed the wobbly gear in the slicer but 2 years later (ie tonight) it stripped. I had no idea where that gcode was … so I imported the gear into FreeCAD and made the key bigger. The 3mf is a tight fit … but the FreeCAD files…
This is an alternative filament guide block for the Pastamatic spool rewinder, with an adjustable top section so you can re-centre the filament guide when spooling. I built a Pastamatic, but as all my spools needed the larger spool…
Scaled the original model correctly. The scaling was way off on the original upload. Opened in prusa along with the lead screw. Used the measure tool on the lead screw. Measured and then scaled the hole for the stabilizer to match with a…
Print the same as the original.
