1 / 7
Adapter for Filament Cores with a Large Center Hole. Pastamatic. — zdjęcie 1
1 / 7

Adapter for Filament Cores with a Large Center Hole. Pastamatic.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is for LARGE centered filament core's that need to be reduced to fit the spindles on the Pastamatic.

Ocena
0 / 5
Polubienia
7
Pobrania
83
Wydruki
0
Wyświetlenia
490
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I made this so that I could reduce the size of filament cores with large centers (74mm) so they will fit the Pastamatic.

The Pastamatic operates at high speed so a tight grip on the roll was paramount, I added 4 padding/friction groves so you can stuff some rubber or foam into them to grip the roll. I just used some Sponge Window Seal I had laying around, cut it to fit in the ‘friction groves’ with a little hanging out (see photos). I only ended up needing to put it in one grove and that was enough grip for mine.

Tagi