1 / 2
Pastamatic Axle Brake- no TPU no Blocks- To transfer filament from one roll to another. — zdjęcie 1
1 / 2

Pastamatic Axle Brake- no TPU no Blocks- To transfer filament from one roll to another.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thies easy to unclip Brakes stop the filament rolls from rotating without moving them by hand or machine.

Ocena
4,75 / 5
Polubienia
21
Pobrania
340
Wydruki
4
Wyświetlenia
1155
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the clips avaolable but found the tension broke the clips. So I used fusion to create these.

I used 2 on the spool I am transfering, 1 on the filament alignment shaft and 1 on the donor receiving spool.

I added a lever arm so it is easly removable

Print 4

 

I would like to thank the original Pastamatic designer https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c. https://www.printables.com/@GekoPrime.

And https://www.printables.com/model/503775-retention-clip-for-pastamatic-spool-winder-driven- I am slill using the large clip to hold down the drice side of the Donor Spool. https://www.printables.com/@schiko.

 

Tagi