1 / 4
SOLO Vario Foam 333 sprayer electric airpump conversion Mijia 2 — zdjęcie 1
1 / 4

SOLO Vario Foam 333 sprayer electric airpump conversion Mijia 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your VarioFoamer sprayer automatic with a Mi Mijia 2 Portable Electric Air Compressor

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a holder to attach an airpump to a SOLO CleanLine VarioFoam 333 pumpsprayer, turning it into an automatic foam spayer for less than 50€.

You can get a plug-and-play aircompressor fitting here

Or drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one

For the airpump I am using a Xiaomi Mi Mijia 2

You can get rebranded ones from amazon for <45€

To attach the holder-plate to the foam sprayer, use a single, socket head M4x20mm screw and M4 nut. 

To attach the compressor cage to the holder plate, use 3x M4x10mm screws and 3x M4x8.1 heat inserts

Print from something sturdy, non-brittle with high layer adhesion like PCTG/PC/PA/ASA. Do not use PLA or cheap PETG as the holder might snap. See 4th foto for print-orientation, use higher infill (40-50% Gyroid) and Tree-Supports.

The Mi Mijia 2 Plug is borrowed from this model and is used to shut off the pump

Tagi