SOLO Vario Foam 333 sprayer electric airpump conversion Mijia 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your VarioFoamer sprayer automatic with a Mi Mijia 2 Portable Electric Air Compressor
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder to attach an airpump to a SOLO CleanLine VarioFoam 333 pumpsprayer, turning it into an automatic foam spayer for less than 50€.
You can get a plug-and-play aircompressor fitting here
Or drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one
For the airpump I am using a Xiaomi Mi Mijia 2
You can get rebranded ones from amazon for <45€
To attach the holder-plate to the foam sprayer, use a single, socket head M4x20mm screw and M4 nut.
To attach the compressor cage to the holder plate, use 3x M4x10mm screws and 3x M4x8.1 heat inserts
Print from something sturdy, non-brittle with high layer adhesion like PCTG/PC/PA/ASA. Do not use PLA or cheap PETG as the holder might snap. See 4th foto for print-orientation, use higher infill (40-50% Gyroid) and Tree-Supports.
The Mi Mijia 2 Plug is borrowed from this model and is used to shut off the pump