Search results: sprayer

Counting matching models…

Printables

Micro-Drip Sprayer Extension

Simple Extension to have the Sprayer a bit higher. Fits the 4.6mm line. I used ASA as its fairly thin and will be used outside.

Order a print of this model

Printables

Glade Automatic Sprayer Retaining Cap

A small cap to fit the glade wall sprayers to keep the front from opening.

Order a print of this model

Printables

Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800)

Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…

Order a print of this model

Printables

Harbor Freight Texture Sprayer Nozzle

This is the changeable nozzle for the Harbor Freight air texture sprayer 2471, which is probably a decade old. The current model number has changed, but I suspect the nozzle fit is pretty much the same. The file is done in openscad which…

Order a print of this model

Printables

ZEP Professional Sprayer Broken Neck Repair

This model will (hopefully) re-bond a sprayer with a broken neck (when it breaks right above the cap). For broken thread see the link below. This model may be snug. The inserts should meet and produce a closed seam. If you have problems…

Order a print of this model

Printables

Airless sprayer accessory wash bucket sieve

Easily resizable sieve to fit your bucket 90 mm diameter 135mm height

Order a print of this model

Printables

Simple Reliable Garden Sprayer | 1/4" Irrigation Stake Design

Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…

Order a print of this model

Printables

Ryobi Sprayer Holder OWS1880

This is a sideways hook style mount for the Ryobi OWS1880 Sprayer, it allows you to mount it to the wall. I store the batteries seperate, however it will take the battery weight as well Mounted with standard No.8 screws

Order a print of this model

Printables

Karcher foam sprayer to PET bottle connector

Order a print of this model

Printables

Replacement Handle / Grip for Gardena Pump Sprayer

EN Replacement Handle / Grip for Gardena Pump Sprayer (PETG) DE Ersatz-Handgriff für Gardena Pumpsprüher (PETG) Description (EN) Replacement handle/grip for Gardena pump sprayers, designed from scratch in FreeCAD. The original plastic…

Order a print of this model

Printables

Wagner Paint Sprayer - 800mL Container and Lid - 0413909 - W100 W150 W200 W300 Series

Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…

Order a print of this model

Printables

Wagner Fence and Decking Sprayer Funnel

A funnel for the Wagner sprayer bottle to avoid spilling paint when pouring it in.

Order a print of this model

Printables

PF Shower Sprayer Wand Holder

PF Model Shower Sprayer Head holder replacement part.

Order a print of this model

Printables

Electric Garden Pump Sprayer Conversion with Detachable Cordless Air Compressor

Edited on 08 October 2024: Added parts for Roundup Sprayer This project turns a regular garden pump sprayer into an electric one using a detachable cordless air compressor. It's simple - the compressor isn't permanently attached, so you…

Order a print of this model

Printables

Rubber Sleeve for Faucet Sprayer

Simple desgin, based on broken original Printed in Flex PLA; .2 Layer Height 100 % fill

Order a print of this model

Printables

Flat nozzle adapter for Platinum Series Foam Sprayer

Updated! I uploaded a longer nozzle version. Has more pressure for those wanting more pressure. Please keep in mind this will ONLY fit the Platinum Series sprayer. You can buy this particular sprayer at Wal-Mart with the foam sprayer…

Order a print of this model

Printables

Watering Nozzle for Pump Sprayers

I recently purchased an HDX 2 gal. Bleach and Deck Sprayer to make it easier to water the hanging plants I bring inside for the winter, but the water pressure is too much even with no nozzle attached. This attachment slows the water down…

Order a print of this model

Printables

Servo Controlled Spray Paint Marking Sprayer

This is a mount that you can put on a Rustoleoum inverted marking spray paint can and actuate it with a standard sized servo. The force required is not great, so even a very inexpensive servo can be used. Perfect for attaching to your RC…

Order a print of this model

Printables

multiboard sprayer hanger/holder

settings: i am yousing PLA+, no supports needed, 1 skirt loop, for the most strength with a hint of flex to snap on tight i recommend 6 wall loops and if you want infill that's up to you but not needed Time according to normal speed on…

Order a print of this model

Printables

craftzman sprayer replacement nut

i design this replacement nut for the craftsman's sprayer that always seems to break easily so you don't have to wait on a replacement (if you can find one) just download, print and you are good to go. infill 100% layer 0.2 PLA will work…

Order a print of this model

Printables

Mosmatic SGS28 Wall Mounted Wand and Sprayer Holder

This is a wand holder designed for use with the Mosmatic SGS28 sprayer. I am not sure it will work with the newer sprayers sold by Obsessed Garage and others. Currently designed for use with 2.5"+ standard flat head screws. Can be screwed…

Order a print of this model

Printables

Marolex Ergo pumpsprayer electric airpump conversion Mijia 2

This is a holder to attach an airpump to any Marolex Ergo pumpsprayer, turning it into an automatic spayer for less than 50€. Drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one:…

Order a print of this model

Printables

SOLO Vario Foam 303 sprayer electric airpump conversion Mijia 2

This is a holder to attach an airpump to a SOLO VarioFoam 303 pumpsprayer, turning it into an automatic foam spayer for less than 50€. Also fits the 2L upgrade tank. Drill a 10mm hole into the tank, then screw in an aircompressor fitting…

Order a print of this model

Printables

Wand hose nut for Ryobi 40V sprayer

Would recommend ASA, PET or ABS Works better then oem. The original has a flaw and will let the hose slip out due to pressure. We have 4 of these units with the same issue. Would use brim support just in case Print as is

Order a print of this model

Printables

Ersatz-Hebel für MEROX Gartenbrause/Replacement-lever for water sprayer

Printed with PETG. Please select support to “everywhere” in the slicer! Original rivet was replaced by a M4 screw. Mit PETG gedruckt. Stützen auf “Überall” im Slicer einstellen! Die originale Niete wurde durch eine M4 Schraube ersetzt.

Order a print of this model

Printables

Hand Sprayer Holder for Utility Sink

This is a holder for a hand sprayer for a utility sink. Fits on the profile of a “Mustee and Sons” Utilitatub.

Order a print of this model

Printables

Misting Sprayer Cold Mist Generator Mispray x10 10L

this model is for non-commercial use only.

Order a print of this model

Printables

Electric water Sprayer

This is an extremely rough primitive MK2 design for a water sprayer. a motor spins a cam lobe which strikes the sprayer trigger and, well it sprays water - I'm uploading by request from Reddit but please understand this is a very rough…

Order a print of this model

Printables

SOLO Vario Foam 333 sprayer electric airpump conversion Mijia 2

This is a holder to attach an airpump to a SOLO CleanLine VarioFoam 333 pumpsprayer, turning it into an automatic foam spayer for less than 50€. You can get a plug-and-play aircompressor fitting here Or drill a 10mm hole into the tank,…

Order a print of this model

Printables

Gridfinity Double-Sprayer-Bottles

I needed sth to store my two mini Sprayer-Bottles and this time I tried the Fusion360 filled boxes. Basically just another 10Min hack…

Order a print of this model

Printables

Sprayer Holder

Sprayer holder

Order a print of this model

Printables

Garden Water Sprayer Holder (adjustable) - Gardena, Fiskars or similar - Irrigation

Update --------- ___ easy to print ___ Garden hose water sprayer holder for irrigation. A tripod stand with adjustable angle or alternatively a simple bipod stand. Simply clamp the hose coupling into the hose holder to irrigate your…

Order a print of this model

Printables

Garden Sprayer Plunger Seal

A replacement seal used on plungers in manual pressured garden sprayers. I used it on my HDX brand sprayer. It should work in other sprayers that use this type of seal with a similar design, like Chapin. Seal diameter is 28mm, max…

Order a print of this model

Printables

Costco Fanttik Water Sprayer Bottle Adapter

- This is my first 3d model, hopefully it works well! - Uses Zep water bottle and tube from home depot - O ring 13mm outer diameter and 2mm thickness. I used the o ring from the original hose. - cutoff the tube from the water bottle…

Order a print of this model

Printables

Gardena garden hose sprayer mount

Fits the gardena 18332-20 75cm garden sprayer

Order a print of this model

Printables

1/2 - 12mm right angle irrigation/sprayer connector

I suggest PETG for longetivity. Brim for better bed adhesion. It's actually 105° to make it easier to print.

Order a print of this model

Printables

Keychain BBQ Sprayer

Make your grilling experience even better! This simple but effective cap is designed to fit standard PET bottles, turning them into a convenient spray bottle for use by the grill. No more messy pouring of water or marinade! With this cap,…

Order a print of this model

Printables

Gardena Water Sprayer Wall Holder/Mount

Never leave your water sprayer head on the dirty ground again! This is an easy-to-print two-piece wall mount for the Gardena premium water sprayer (No. 18317-20) or Gardena comfort water sprayer (No. 18315-20). The holder screws onto a…

Order a print of this model

Printables

garden hose sprayer

ready to level up your garden? this is the perfect tool to do so. sprays in many directions so you can water multiple plants at once, sprays up to 40 feet (depending on your water pressure), and prints in just over an hour! Don't forget…

Order a print of this model

Printables

Automatischer Duftsprüher / auto scant sprayer

You can get more info and code here: https://gitlab.fire-devils.org/ManuelW/Duft-Spruher Category: Household Supplies

Order a print of this model

Printables

water spray (Garden Hose Sprayer) mount remix - Works With Prusa Slicer

Adjusted the file and converted to STL to work with prusa slicer. Original 3MF file was giving error in prusa slicer.

Order a print of this model

Printables

Field King Backpack Sprayer Trigger Valve Gasket

If your spray wand leaks continuously, it may be this part that is broken. You can buy a new trigger assembly online for $17+ shipping which isn't too bad but I didn't want to wait for it. When you take apart the wand assembly, the…

Order a print of this model

Printables

Vego Garden Sprayer Mount

A wall mount for the Vego Garden sprayer head . Attaches with two #10 screws.

Order a print of this model

Printables

Gardena Water Sprayer Wall Mount

Never leave your water sprayer head on the dirty ground again! Remix of Purrfect3D s neat little mount to make it easier to mount. This is an easy-to-print two-piece wall mount for the Gardena premium water sprayer 18317-20 and Gardena…

Order a print of this model

Printables

DIY Spray Paint Pump from Disinfectant Sprayer

**DIY Spray Paint Pump from Disinfectant Sprayer - Free STL** Turn a cheap disinfectant sprayer into a fully functional spray paint pump for under $1! This DIY project uses a 370 dual-head air pump and a 3D-printed housing (PETG…

Order a print of this model

Printables

Lever for SOLO 40110 garden sprayer

Print with PETG or ABS. Supports needed.

Order a print of this model

Printables

Garden hose sprayer

Garden hose sprayer This 3D printed "Garden Hose Sprayer" is perfect for gentle watering of garden plants. For proper functionality, a sealing ring (O-ring) is required to prevent water leakage, even under higher pressure. For maximum…

Order a print of this model

Printables

Orbit Sprayer Lever

The lever of the sprayer broke so I wanted to try fixing it. This works pretty well but it's not a perfect duplication. I used a #6 screw and nylock nut for the pivot. The screw was 1 1/4" long and cut to final length. For outdoor use…

Order a print of this model

Printables

Hose Holder for Chapin 1 gallon pump sprayer

40 minutes to print no supports print in place Glue it on

Order a print of this model

Printables

Hanger sprayer

📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!

Order a print of this model

Printables

Micro-Drip Sprayer Extension

Simple Extension to have the Sprayer a bit higher. Fits the 4.6mm line. I used ASA as its fairly thin and will be used outside.

Order a print of this model

Printables

Truper Water Sprayer Wall Holder/Mount

Easy to print single-piece wall mount for Trupper water sprayer. Has bottom hole for water drainage. Does not require supports.

Order a print of this model

Printables

Mosmatic Stubby Sprayer Gun Bucket Mount

Easy draw but sturdy mount for mosmatic stubby gun for any 5Gal Bucket. Print with rigid filament high infill - dont want to drop your expensive sprayer! I used PETG-CF 100% Infill Has Nozzle holder

Order a print of this model

Printables

Replacement Gasket for HDX 1 Gallon Sprayer

The gasket on my sprayer died and rubber bands just weren't quite working. Printed a replacement in TPU faster than I could have gone to the store to buy some o-rings. Fits the 1 gallon HDX Garden Sprayer . Use your softest TPU. STEP and…

Order a print of this model

Printables

Dewalt sprayer flap valve

Replacement Dewalt flap valve 100% infill and 10 perimeter printed in TPU. This is the sprayer…

Order a print of this model

Printables

holder for Chestnut C3ESPpro, Brush, Sprayer

i needed a holder for my coffeegrinder, so i designed it myself.

Order a print of this model

Printables

Ryobi Sprayer Replacement Cap (TPU)

I made this to replace the missing cap on one of my ryobi 18v sprayer tanks. (AC2GAL & AC1GAL) I didn't realize until after I designed it that several other options were uploaded. Mine is specifically designed to be printed in TPU. It…

Order a print of this model

Printables

Backpack Sprayer Hose Fitting

Intended to be printed with TPU 95a Seems to print fine on its side, but it's been a while. Try sinking it into the bed

Order a print of this model

Printables

Ryobi electrostatic sprayer mount

mount for the Ryobi electrostatic sprayer

Order a print of this model

Printables

Lawn and garden sprayer check valve

This replaces the check valves of a Flo-Master HD-1, Lawn & Garden Sprayer. The OEM part identifies itself as Mono Valve 151-400; it has a 23mm disc diameter. Two valves are used, one at the bottom of the pump tube and the other at the…

Order a print of this model

Printables

holder 4 Brake cleaner Pump sprayer

to ensure it wont fall a side an make a mess

Order a print of this model

Printables

Refillable Sprayer Holder

Magnetic holder for the Maddox Refillable Pressurized Sprayer. I used these magnets and this glue for assembly. I let the glue cure for a full 24 hours because it takes a long time to dry without air. I also made a magnet cover for it…

Order a print of this model

Printables

Air Wick Freshmatic Sprayer

This 3D model is a custom enclosure and pump lid designed to fit an Air Wick Freshmatic aerosol can. The enclosure houses the top of the can and spray mechanism, while the pump lid interfaces directly with the nozzle, allowing controlled…

Order a print of this model

Printables

Glade Automatic Sprayer Retaining Cap

A small cap to fit the glade wall sprayers to keep the front from opening.

Order a print of this model

Printables

Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800)

Order a print of this model

Printables

Sink Sprayer Holder

Standard Hole Sink Sprayer Holder / Caddy 35mm sink hole. Big Beefy design won't work loose. Extra material on top in case you want to open up the hole for your sprayer. 22mm current

Order a print of this model

Printables

Simca 1301 Special - Windshield sprayer nozzle

On the plastic insert, I made a smaller hole that serves as the nozzle, smaller than the original size. It may be sufficient for some users, but it is primarily intended as a guide for possible further enlargement using a knife or a file.…

Order a print of this model

Printables

refrigerator water dispenser prank sprayer

printed with no supports, .2 layer height, and 3 wall loops. 8 min print time.

Order a print of this model

Printables

Nozzle to foam sprayer LS10 - replacement

Functional replacement cap/nozzle for the LS10 foam sprayer. Model tested and prints well. Download includes an STL file and an editable source file. Print with a chemical- and water-resistant filament for best results. Check out my…

Order a print of this model

Printables

Top Sprayer Arm Bearing - Hisense Dishwasher

Hisense Dishwasher. The top basket sprayer for the utensil rack fell off after it completely wore through the thin plastic ring that held it in place. It is so thin, it looks designed to fail. I could not find this part on offer.…

Order a print of this model

Printables

Craftsman battery operated garden/weed-killer sprayer holder

I got very tired of the cheap/weak battery operated spray wands that come with the 1 gal. liquid weed killer bottles. I then stumbled on this Craftsman spray wand, it is absolutely amazing. This holster keeps the sprayer wand neatly…

Order a print of this model

Printables

Replacement bottle for Nilfisk Super Foamsprayer

🇬🇧 English: This is a custom-designed replacement container for the Nilfisk Super Foamsprayer. It features a compatible thread for the adjustable foam head. Ideal if your original bottle is cracked or if you want to have multiple bottles…

Order a print of this model

Printables

Harbor Freight Texture Sprayer Nozzle

Order a print of this model

Printables

ZEP Professional sprayer Broken Thread Replacement

Second thread to split in a month. Not much plastic thickness with in the thread depths. Should not need any glue to assemble so its easy to use PETG (remembering that PETG is chemical resistant). Print the thread inserts (left and right)…

Order a print of this model

Printables

ZEP Professional Sprayer Broken Neck Repair

Order a print of this model

Printables

Gardena Sprayer Nozzle Compatible Replacement (823-20)

Replacement nozzle compatible with Gardena bottle sprayer (823-20). A similar item (5386-20) is also sold by Gardena at absurd prices, I decided to take matters in my own hands. Compatible with pressure sprayers: 864, 867, 869, 875, 828,…

Order a print of this model

Printables

Airless sprayer accessory wash bucket sieve

Easily resizable sieve to fit your bucket 90 mm diameter 135mm height

Order a print of this model

Printables

Streetwize 10 & 8 Litre Portable Pressure Washer Sprayer Hose-to-Handle Coupler

The Streetwize 10 (or 8) Litre Portable Pressure Washer Sprayer is handy but one of the major weak spots is the connection between the hose and the gun/handle. It measures on 6mm in diameter. This is a replacement built from the ground…

Order a print of this model

Printables

Simple Reliable Garden Sprayer | 1/4" Irrigation Stake Design

Order a print of this model

Printables

Ryobi Sprayer Holder OWS1880

Order a print of this model

Printables

Karcher foam sprayer to PET bottle connector

Order a print of this model

Printables

Replacement Handle / Grip for Gardena Pump Sprayer

Order a print of this model

Printables

Gardena multi sprayer threaded locking ring

A spare threaded locking ring for the Gardena Premium multi sprayer, I assume it works for the Comfort version as well. I’d recommend avoiding PLA and printing it at least in PETG, if possible even better in ASA.

Order a print of this model

Printables

Sprayer handle for Lidl accu sprayer, mod

Handle for Lidl accu sprayer.

Order a print of this model

Printables

Wagner Paint Sprayer - 800mL Container and Lid - 0413909 - W100 W150 W200 W300 Series

Order a print of this model

Printables

Wagner Fence and Decking Sprayer Funnel

A funnel for the Wagner sprayer bottle to avoid spilling paint when pouring it in.

Order a print of this model

Printables

PF Shower Sprayer Wand Holder

PF Model Shower Sprayer Head holder replacement part.

Order a print of this model

Printables

One Way Value Sprayer

A simple one way valve for "es2 pro" sprayer. Dumb thing loses it's prime normally, specially with alcohol, so I made it keep as much liquid in it. Makes it so much easier to reprime, use any form of suction on the sprayer, a syringe with…

Order a print of this model

Printables

Kärcher Foam Sprayer to PET Bottle Adapter

A practical adapter for connecting a Kärcher foam sprayer to a standard PET bottle. This model is useful when you want to reuse common plastic bottles as reservoirs for soap, detergent, or cleaning solution instead of using the original…

Order a print of this model

Printables

Garden Sprayer Handle

I'm not sure what brand this generic garden sprayer is, but I replaced the broken handle with this printed one. STEP file included if you need to modify it. I used an M3 screw to replace the pin.

Order a print of this model

Printables

Pressure Sprayer Tip / Nozzle

Due to the thread, I strongly recommend to print this at 0.1 mm layer height. It should fit well but if not, scale it by increments of 0.01%. Don't forget to re-use the rubber seal : ) Buse pour pulvérisateur à pression Une hauteur de…

Order a print of this model

Printables

Moen Faucet Sprayer Aerator Removal Tool v2

This is a tool to disassemble the sprayer head on a Moen faucet to access the aerator and clean it.

Order a print of this model

Printables

Nozzle Cap for Backpack-Style Sprayer

I have a Field King Max backpack-style sprayer and this cap prevents any weedkiller or other liquid from leaking from the tip. Usually it's just a few drops but I'd rather not get Roundup or other weedkiller onto other stuff.

Order a print of this model

Printables

Garden Sprayer quick stop

After the reorganization of the garden, one of the watering cans became redundant, so I turned it off. The watering can goes up but doesn't water. Sprayer is deflector type, brand Rain Bird. Printer Bambu p1. Filament PETG. Resolution 0.2…

Order a print of this model

Printables

Automatic Sprayer box for terrariums

If you just purchase a automatic spray system from Aliexpress and you need to hold it solid in a wall, this is your solution, a box that fit perfectly and you can stick it to the wall easely with double sided tape.

Order a print of this model

Printables

SPARE PART FOR A PRESSURE SPRAYER

A spare part for my pressure sprayer printed in nylon.

Order a print of this model

Printables

Mini Jet Nozzle for Biltema Foam Sprayer art. 2000043096 (no support)

Mini jet nozzle insert for Biltema foam sprayer, art. 2000043096. This 3D printed part fits in the quick connector in front of the foam liquid bottle. It is made to give a narrower and more concentrated water/foam jet than the original…

Order a print of this model

Printables

Bag Hooks for Profinstrument DF-330 Airless Paint Sprayer

These are simple hooks for the small bag that comes with the Profinstrument DF-330 diaphragm airless paint sprayer. I designed them so the bag can hang on the sprayer handle and be used to store wrenches, spare parts, and common…

Order a print of this model

Printables

Holder for Gardena Comfort Multi Sprayer

EN: Bracket for Gardena Comfort multi sprayer Variant for wall mounting or for Kemper Olpe frost-proof faucet tap. DE: Halterung für Gardena Comfort Multibrause. Variante für Wandbefestigung oder für Kemper Olpe Frostsicherer Wasserhahn…

Order a print of this model

Printables

Ryobi P2810 Sprayer Cap

This is a simple cap for the Ryobi P2810 1-gallon sprayer tank. If you order additional tanks they include a cap, but I wanted something that was easier to grip. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…

Order a print of this model