Bidet Sprayer Toilet Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A toilet mount for your bidet sprayer.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
*Before Printing* some toilets tank mechanisms can't flush if the lid is slightly lifted from any of the sides, so raise your toilet lid ¼-½ inch up and see if allows you to flush before you print this (I think this only happens on some toilets that don't have a handle and instead have a button you press on the toilet cover).
*Some of the pictures show a fillet on the back leg, I removed that for easier printing, I'm just too lazy to retake those screenshots, the cover photo is the correct design with an easy-to-print rectangular back leg*
I printed 4 of these so far for all the bidets in our house and at work. I have no idea if bidet sprays have a universal standard or not, I took the measurements from one of our bidets, and it just so happened to work with the 3 different model bidets scattered in my house and at work. The max dimension for the sprayer hose's outer diameter is 0.638 inches (16.2 mm), the max dimension for the connector between the hose and spray is 0.889 inches (22.6mm), and the dimension of the maximum thickness of the toilet tank wall is 0.57 inches (14.6 mm) (see reference photos).
Printing:
I printed with 0.2 mm layer height, 100% infill, a brim, no supports, and with the same orientation as slicer pictures.