2,627 models
Want to hang the toilet paper? I got you You never know where to put your phone when on the toilet? I also got you Introducing, the never seen before (not really), toilet paper holder with a smartphone holder. Gone are the days when you…
Print approx. €7.45–€9.10 excl. taxPreliminary estimate for PETGSource material: PET
I printed this with the color setup for my Covid mask straps so white and black are in positions 4 and 5 respectively. I split the print vertically using the Multi-Material 2S but it could be printed by swapping filaments at the layer…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
This is actually my wife's idea and I made it for her. She needed toilet paper holder. Looks fantastic fully loaded by white rolls. Happy printing! Print instructions This design fit on typical MK3 heat bed 25x21cm. Body is made with two…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…
Print approx. €4.48–€5.48 excl. taxPreliminary estimate for PETGSource material: PET
Simple toilet paper holder design. It can hold standard European toilet paper with dimensions 90(95) x 140 mm (length x diameter).
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Toilet - THRONE ROOM right side - sign, easy to print
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
This Mini Toilet Paper Buddy is the tiniest roll of TP you’ll ever need! 🧻✨ Perfect for adding a touch of humor to your desk, shelf, or workspace. ✅ Super Small & Funny – A tiny toilet paper buddy for any occasion ✅ Perfect for Gag Gifts…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Cute Sheep Toilet Holder Remix Print Instructions Default Prusa Slicer 0.10mm ~ 0.20mm Quality Print settings Filament : Black PLA, PETG Perimeters : 2~3 Support : None Brim : None Change Log 2024-02-26 (V2) Sheep Toilet Paper Holder…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
shaun the sheep toilet paper roll stand this is a complete new head design, print in 2 parts für quick and easy printing without support, legs print in vase mode the eyes print with color change at layer height 4,4mm glue the head parts…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I found a model of a LEGO man holding a roll of toilet paper, but unfortunately it was cut off. So I mixed up some models to get a self-standing man with a scared face and a matching hair style in a good size. To make it feel valuable, I…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Handy toilet & bathroom organizer for electric toothbrush and other needed items. Size is about 85mm x 144mm x 125mm (H x W x D).
Print approx. €7.32–€8.95 excl. taxPreliminary estimate for one variant
Toilet sign
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
I need to store several toilet rolls in my toilet. Therefore, this project was designed. The dispenser is capable of holding four toilet rolls. Simply put toilet rolls into the dispenser from opening on the top, the rolls will drop to the…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…
Print approx. €24.50–€29.94 excl. taxPreliminary estimate for one variant
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
First of all I have to be honest, this idea is not from me. I found these words somewhere in the wide web* and liked them. So I made my own interpretation with it. As special feature, I used fluorescent filament for the base plate to make…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Funny bathroom plate with a male and female character design. Fully customizable parametric model, STEP and FreeCAD files are included.
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for one variant
I was looking for a toilet sign and found this one by johnbiehler . Remixed it to have the middle bar with fillets as well. Credits Toilet Sign by johnbiehler
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
Remixed in onshape based on the original dimensions. Added fillet to the shaft to increase stiffnes, shaft end cap integrated with chamfer to print without supports. Onshape source model Printed with PLA: 0.8mm nozzle 0.3mm layer height 3…
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for one variant
Fully movable huge Lego Figure as a toilet paper roll holder Scale ~10:1 individual movable arms, hands, legs and head (depending on your printer settings & quality you should use different shoulder parts to ensure the arm is turning…
Print approx. €16.16–€19.75 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This model is drawn from a logo seen on the internet, a lot of people were asking where to get the STL, an i decided to draw it up :) Model comes with both color change, and standard gcode. Sliced for Prusa MK4 0.4 nozzle Prusament PLA
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for one variant
Der Druck besteht aus zwei Teilen. Die Halterung Die Stange zum Abrollen Die Stange lässt sich ohne Kraft in die Vorrichtung legen, da sie etwas Spiel hat.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
Lets commemorate this crappy year! Designed in Fusion360 and printed with 3D Fuel Bone White and Metallic Gold Pro PLA on my MK3S. Print instructions These parts can be printed with very little infill, I think I used 5%. No supports…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
Toilet - THRONE ROOM DRAGONS right side - sign, easy to print
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
For a hosed hand sprayer used as a bidet or for pets or cleaning diapers or whatever. The one that came with mine (~$20 on amazon) was too large for the cistern lid to sit correctly. Cistern wall was 11.5mm-ish thick, for reference. Print…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
My cat toilet roll holder https://www.printables.com/model/1306353-toilet-paper-roll-cat-friendly-animal-klopapierrol I wanted to put my cat toilet roll holder next to Gromit. As the cat has a tail, I also added a tail for Gromit. The…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Modified end of the stick Modified base Added cover
Print approx. €8.69–€10.62 excl. taxPreliminary estimate for PETGSource material: PET
A cistern key for IFÖ toilets. Designed to print with the bottom of the key on the bed. Then it prints without support. You might need a brim to keep it in place. Support My Work Should you want to, you can support me on Patreon . If you…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
I made a replica of the cap and spring to close the 2 side holes of CIFIAL's OPTIMA toilet I made in PETG Cap Infill: 15% Layer Height: 0.2mm Supports: Yes, everywhere and snug Spring Infill: 100% Layer Height: 0.2mm Supports: Yes,…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
The gear knob shaft can max be 18mm wide The big version can max have a 25mm wide It will possible ask for support when slicing you have to fill paint in the text or if it is light filament maybe pause it after first layer over the text…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Toilet Bumper Roca Victoria Sparte Parte Replacement Printed with Prusa MK4 and Esun PLA+
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Introducing Mooni – the moon-shaped toilet paper holder that adds a touch of elegance and whimsy to your bathroom! Mooni is more than just a toilet paper holder; it's a statement piece. Crafted with a sleek, moon-inspired design, it…
Print approx. €5.89–€7.19 excl. taxPreliminary estimate for one variant
Starting point of the project was learning about past sanitary customs and finding shapes which had the potential to be repurposed into functional bathroom object. The main inspiration comes from medieval castle toilets, which typically…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Print it upside down, some support for the lines and letters will not harm.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Dessin parametrique, dimensions modifiables. Aucune connaissance de freecad necessaire, il suffit de changer les valeurs des cases vertes dans le tableur du fichier fourni. Entrer les dimensions sous la forme “xx mm”. Ne pas oublier “mm”.…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
3D printable toilet paper tubes
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
A reproduction of the key who open the toilet roll dispenser in my company. Print instructions You have two options : use the pre-sliced G-code and print it on your MK3S+ download the best slicer ( PrusaSlicer ) and use the following…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
While looking for a nice craft idea for Mother's Day, we came across the common method of stamping hearts with toilet paper rolls. We really liked the idea because, unlike bought or 3D-printed stamps, all the stamped hearts look a little…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
The tap in our downstairs toilet started to wobble when used. I looked up under the sink and could see that the original metal washer had started to rust and come loose. You can see the rust stains in the photos. Using Fusion 360 and…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
This is a remix of the original. I added a rounded backing and border edge the design. I hope it is found to be useful.
Print approx. €4.72–€5.76 excl. taxPreliminary estimate for one variant
For my RV
Print approx. €23.46–€28.67 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
A replacement spacer for a toilet seat lid This is specifically for a Cosmos Clivia by abusanitair . Though its parametric, so you can adapt it to yours, if it has the same form.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Just a guy that holds your TP rolls!
Reworked idea of ErdosNumber4 model. All parts are separated into two files - black and white. All parts are made tighter, so for assembly is not necessary to use an excessive amount of glue. Without a precision printer, some size…
*You will need a Spring-loaded toilet paper rod By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License…
Meet Shaun the Toilet-Sheep, your newest bathroom decor! Uses a conventional toilet paper roll as body. Supports (on the builtplate) are only necessary for the face. No glue or screws required for assembly. Face and tube connect via a…
Model 3D Model Description: “Toilet Door Sign” This toilet door sign is a fun and unique addition to your bathroom! It features a male and a female figure in an emergency situation: both are in a hurry to get to the bathroom! 🚽🏃♂🏃♀ Note :…
Toilet - Thinking room - sign, easy to print
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
idk why u would want to print this but here u go more of my models on my account and more skibidi models on tag skibidi
Toilet sand clock timer This is my custom version of sand clock from https://katamco.com Carpe diem is a Latin aphorism, usually translated as " pluck the day " or " spend your day trully " Assembling Cover the empty holes with a…
Can be printed with any Prusa you like. Will be printing mine in transparent PETG when it comes in, but I suppose any filament will do. Keep in mind the natural wear and tear over time, and water contact if using near a sink. Longer print…
Sources: The Snail from: https://www.printables.com/model/262274-filament-schnecke-filament-freunde-filament-snail thx __ The Idea from: https://www.printables.com/model/1257063-toilet-paper-roll-holder Also the solution with black pupils…
Its the Skibidi Toilet! Made by GO2GULAG seen in his game, Skibidi Toilet Rising 2: Sons of Skibidey The model stands 11 cm tall There are some parts that has some overhangs and could use some supports, but dont need supports. Print…
I saw the reference picture on Reddit and decided to remake it. This one is not as pretty as the reference, in my opinion. Be careful with the long rails that fit the pieces together, as it's definitely possible to break them when…
This toilet paper holder was inspired from https://www.thingiverse.com/thing:2738946 but designed from scratch. The head was designed to look like Shaun the Sheep. The Skinny Bottom & Legs are intended for standing the toilet paper roll…
The wall-mounted toilet paper holder with a shelf for a mobile phone. Timelapse video: Print instructions 2 x 6mm Wall Plug 2 x 3mm Screw
A barbie sized toilet. Use 1.75mm filament for the hinge. Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You can also send me a tip on paypal:…
This is a remix of a great model by goldmax on thingiverse. The 2nd picture shows the new remixed body. I had to remix it for two reasons: I added more space between the arms to allow for Charmin Ultra soft/strong rolls from Costco as the…
Hello, fellow campers! I have designed this Toilet Roll Holder specifically for bush camping purposes, though it is also very handy for stashing an emergency roll in the car (because let's be honest - you never know when you'll need it).…
I printed it with PETG and 25% infill to have a little more strength. If you want customizing just let me know. Let it roll! 😉
Male and Female Restroom Sign Model This model features a male and female restroom sign design, perfect for use as a decorative piece or practical signage. With a sleek and minimalistic look, it clearly represents the universal restroom…
pecora con rotolo carta igenica in PLA . Non necessita supporti
The ultimate sheep toilet paper holder out there. I remixed a few variants to combine the best parts of them. This version features screwed parts (no glue needed for assembly) as well as a wide range of different heads (each with a single…
found it on the toolbox (toolbox has no copyright laws)so now its mine i dont know if u can print it but it should work supports are recommended also printing it standing up is also recomended MORE MODELS ON SKIBIDI TOILET ON MY ACCOUNT
A toilet for your key ring, you never know when you might need one The difference between type 1 and 2 is the orientation of the key ring The toilet with a whistle is only type 2 No supports needed Use your favorite filament I printed…
🇩🇪 Dieses Testdruck Modell verlangt deinem Drucker alles Mögliche ab! Überhänge, Stringing Test, Layershift, Layerhaltung und Stabilität. Und das alles in einem genialen und wunderschönen Design! Und es hat sogar witzige Wackelbeine, die…
The kids and I had this silly idea about having a toilet for our elf on the shelf. One week later and it now exists. For the benefit or the detriment of all mankind. You decide. And Happy Holidays. Build video here:…
A Star Wars toilet sign that helps you taking a dump. I printed it with a color change for everything above the baseplate. I had some struggles with the black filament so the top surface shows some underextrusion. Remix of the PANNEAU…
East to print: 4 x Legs 1 x Body (Printed upright, use brim if needed) 1 x Head No supports needed. Simply glue the legs into the body.
This is the original Toilet Paper Sheep design as seen on Instructables: https://www.instructables.com/Toilet-Paper-Sheep/ You can also copy and tinker it on Tinkercad: https://www.tinkercad.com/things/281Tr0VFssU…
I printed it with 1.6mm shell thickness and 10% infill. The holes for wall mounting are 350mm from each other. For bigger printers with 400x400mm print beds I uploaded a single piece model and a slim version. UPDATE The slim version can…
I had a toilet paper holder "Grundtal" from IKEA for a long time now. It broke just a few hours ago, so I got inspired by it and made a model to print a substitute. That should not break so easily I printed it with 2 perimeters and 20%…
Du möchtest die Gästetoilette unverständlich kennzeichnen? Dann bist du hier genau richtig. Hier ist die Version 2 von meinem Toilettenschild. Das Schild ist zweiteilig, es wird mit doppelseitigem Klebeband besfetigt, ich kann…
UPDATE: Now Supports Large Toilet Paper Rolls! What's New: I've added a Large Roll Version to this project. You can now choose between two different models depending on your toilet paper roll size: Upgrade your bathroom with this modern,…
This is a remix of the Lego_man. Holder toilet paper by vvK187. We buy the extra large rolls of Quilted Northern (https://amzn.to/2VBXz7r) and they just would not fit on this. I scaled him to be a little bigger, then I carved out the…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
A tissue box with a screw-on lid. Remove cardboard core from the toilet paper roll and pull it through the opening.
Toilet Door Sign - Warning! 3D Printing Room. You need to add a pause in the slicer on the layer where the characters begin to make the print two-color. Sign size: 160 mm x 205 mm
Hello everybody, this is a collection / remix I did around christmas as a gift. I basically started off with the stormtrooper head https://www.thingiverse.com/thing:4267739 as kalunho3d's description supposes I used the hands and rod from…
The files for the letters P and O are provided. Print 2x 'P' and as many O's as you want. I've included 2 versions of the 'P', one has a squared descender and the other has a rounded descender so you can choose which style you prefer. I…
This little toilet is a fun easter egg to add to your home decor or dollhouse. It measures about 100 mm long when assembled. It has a movable seat and lid, and a pipe down from the bowl in case you want to flush anything down. I've also…
Lego Man Toilet Paper Holder HowToPrint: - Layer Height: 0,2mm - Support: No - Infill: 25-30 %
I originally made this as a gift, and it came out great! You can use this as a toilet brush cup or as a flower pot. I made this for 85 mm diameter brush, so if your brush has a different size, scale both models like this before printing:…
There are 4 pieces, print each in the orientation as downloaded, no supports. Each piece has a screw hole, so you don't need to glue them all together before hanging on the wall. But I suppose it wouldn't hurt.
Doll house Toilet paper, Scale 1:12
A toilet paper shelf that can be combined in groups to create a stack of toilet paper! Attaches to 19mm wide double-sided tape (as marked in the photo). Designed for toilet paper with a diameter of 12 cm and a height of 10 cm. Printed…
Giant minifigure toilet roll holder. These are about 8.33 times as large as normal minifigures. Much the same in appearance as the source model I remixed from, but updated to improve construction and ease of assembly. I also downloaded a…
The bin is 5 perimeters of PETG with gyroid 10% to get it waterproof. I added some fine sand after 5cm on the head to keep it stable. Make your toilet great again!
