1 / 2
Pressure Sprayer Tip / Nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 256
- Makes
- 1
- Views
- 2,324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Due to the thread, I strongly recommend to print this at 0.1 mm layer height.
It should fit well but if not, scale it by increments of 0.01%. Don't forget to re-use the rubber seal : )
Buse pour pulvérisateur à pression
Une hauteur de couche de 0.1 mm est fortement recommandée à cause du filetage.
Si l'embout ne se met pas bien en place, redimensionnez par incréments de 0.01%. N'oubliez pas de réutiliser le joint : )
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.1 | |
| Perimeters | 3 | |
| Infill | 20% | |
| Bottom & Top | 5 | 5 |
| Supports | ||