Kuat Transfer V2 Rear Cradle Angle limiter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A part to limit the Kuat Transfer V2 rear wheel cradle at a better angle for heavier and longer bikes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I made this because when loading a heavier, longer mountain bike (Orbea Wild 2024) to my Kuat Transfer V2, even though the bike is still under the 60lbs weight limit, the rear wheel cradle allows free movement, tilting the bike thus transferring more weight to one side, which seems a little dangerous for driving on a highway.
This aims to make it a little safer for me to carry the bike with the rack but I have not done any extensive testing, so YMMV.
Additional hardware is required to join the top and bottom parts to fix it to the rack tube, and to act as a “pin” on the top hole, which is the actual part limiting the cradle movement.
I recommend printing this with engineering filament, ABS or ASA at least, using 100% infill.
Edit 19/Apr/25: Added reinforced top part with updated photos. The piece is much stronger now. Have not tested offroad; might require a 2nd clamp on the other side of the cradle (which I have not designed yet).