1 / 5
Adjustable rear dash cam mount for cars or trucks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 2 part rear dash cam mount that can be adjusted to whatever angle you need for your car or truck.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
No supports needed, just male sure it's oriented with the flat part down and thr connector pieces up. Once printed, I used an M3x20 screw and nut to adjust tension. The flat part used double sided sticky tape to mount it to the window, and the camera screwed into the slotted side. Printed in PETG to withstand hotter temps without drooping.