Liczymy pasujące modele…
A housing to put the rear view camera on the car roof just behind the sharkfin antenna. Placed here the camera is kept very clean, especially on hatchbacks where the rear of the car gets very dirty very quickly. The full height versions…
We wanted to use our Apeman C550 dashcam in our new car, so I designed this holder for it. I used thick 3M double sided tape to mount it in the car. Dont use PLA: it will deform in the sunlight. ABS works fine. Support is needed! 2025-09:…
Allows you to mount a Promate DASHCAM-2 (or potentially a DASHCAM-1) onto a base with a GoPro - type mount. Category: Camera
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van. Requires modification to the mount that comes with your dashcam. I have printed the parts in PETG and they have survived a summer in…
STORY / BACKGROUND: I decided my otherwise-stock e-bike needed some accessories, this model is the second idea I thought of after I designed and printed the cupholder unit:…
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
********** ENGLISH *********** Mounts and extensions for the cameras of the usual motorcycle dashccams. The new version has the following improvements: Base arms detached from support plates, so now the "eyes" are printed from "loops" and…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
A TPU lens cap for Nextbase 422GW dashcam to protect the lens when removing it from the windshield mount. The way it's designed, the cap offers a secure fit and doesn't slip off despite the cone shaped lens.
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
Included basic Quadlock disk adaptor. It can simply be combined with our models on print bed for other options. No surprise PLA is not suitable for these mounts in Oz summer. Might even be struggling with PETG. PETG seems to be holding…
Made a Base for my dashcam, because i dont like to install it permanently. Use some double sided tape and stick the camera on to the base! I also added some kind of rubber feet (i reccomend Uhu Patafix [called here in germany]) at the…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations, This I did several years ago, but never published. The model has been on my wife car since 5+ years without any incident Since I did not wanted to use…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations. This is the second adaptation I did, but feed mostly from my previous model (which I adapted from AJQuick). I needed to do a second adaptation because…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
The original suction cup only lasted 7 years, unfortunately. Then the plasticizer leached out of it (AEG couldn't have known I use my car outdoors, and the sun in Northern Germany is unexpectedly harsh...). Anyway... So I bought a new…
This model is a replacement shell for the GPS module in a NextBase Duo dashcam, to replace it if it breaks cause they're pretty weak where they attach to the suction base. Print both sides in a heat and UV resistant filament, I used ASA.…
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
Windscreen mount for Nextbase Piqo dashcam. Snug fit. Use double sided tape to fix the mount to the windscreen.
Changed the dimensions of the model to fit my specific dashcam ( https://www.amazon.com/gp/product/B0BJZQ37G7/ref=ox_sc_saved_title_8?smid=A3CIGEUYW4U1DT&psc=1 ) and my car (Toyota Camry SE 2024) Photos in the car are of the mockup I made…
We wanted to use our Apeman C550 dashcam in our new car, so I designed this holder for it. I used thick 3M double sided tape to mount it in the car. Dont use PLA: it will deform in the sunlight. ABS works fine. Support is needed! 2025-09:…
In order to be able to use my dashcam 70mai (model M500) in several vehicles, I have created another compatible holder (to stick, to fix ... ). To attach the holder, I share the bracket from https://www.thingiverse.com/thing:6236453 fully…
I made a small dashcam rear view camera mount to avoid having to drill through the car body. It uses the screws that come with the original mount for the hinge, and the screws that come with the camera for the backplate. Simply slide the…
Recommended to print out of PETG or other heat tolerant filament. No supports needed. Scale to whatever size you need for your project. Use double sided tape or adhesive on the back.
I didn't want to mount our back dashcam onto the windscreen as I didn't want the cable flexing each time I opened the boot. The clip is wide enough not to move around. It's long enough for your camera to be able to clearly look out of the…
Dashcam Platform Adapter for Tesla Model 3 Rearview Mirror This adapter provides a flat platform to mount/secure the camera to the Tesla Model 3's rear view mirror base. (I use 3M VHB tape to attach it to the base.) Note: using PETG or…
I was having trouble attaching the rear dashcam to the trim of my Honda CRV. This is what I came up with. On the rear wing of the wedge I put some ¼ inch adhesive backed foam to help keep the camera in place as well as absorb shock while…
This is a clip-on mount for a Vantrue Element E1 dashcam. It should also work with the E1 Pro and E1 Lite. It is designed to clip onto the forward edge of my 2022 Ford Transit 350 XLT van dashboard. I did not want to have the dashcam…
I have HAD a Cobra dash cam (Model CDR855BT) that came with a suction-cup mount to be used on the windshield glass. It would sometimes stay attached for up to a few weeks at a time but then I'd find the camera in the seat or the floor…
Printed in ASA so it doesn't warp, upright print no supports needed
I created this case to mount the Insta360 One RS into my car as a dashcam directly powered by cable, without the battery. This way, the battery life does not get affected and The camera feels smaller.
This design is intended to use the mounting hardware already on the Pelsee and the BMW mirror mount plate. To access those screws, you need to scrape off the 4 foam pieces on the back of the unit to access the screws. Then you unscrew…
Skoda Octavia Combi II - Vantrue E2 rear dashcam mount The camera is only clicked in and not glued. It holds very good. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Rafts:** Yes Supports: No **Resolution:** 0.2 Infill: 20%…
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
Replacement ball socket thing for the garmin mini 2 dash cam. They're like 20 USD on amazon and that's dumb so here's a nominally free one.
3D printed fix for broken slide mount on 70Mai Pro 2018 dashcam. Requires x2 M1.6x10 screw. Print using ABS.
This adapter is useful for Yi Dashcams made in the late 2010's under several model numbers, such as my model the “Yi Smart Dash Camera - Model YCS.1015.INT”. I had lost the original mount and since Go Pro mounts are much more supported by…
********** ENGLISH *********** Mounts and extensions for the cameras of the usual motorcycle dashccams. The new version has the following improvements: Base arms detached from support plates, so now the "eyes" are printed from "loops" and…
I've installed a 2 channel dashcam into my 2024 Mazda 3 BP. Because I didn't want to stick the rear cam to the headliner or the rear window, I designed the bracket, that slips between the car's roof and headliner. Update : I've reworked…
E N G L I S H Cover for a standard rear dashcam Suitable for those usual ugly things with that sheet metal base. Simply glue it on with polymer adhesive or Pattex-Extreme, then you can remove it again later. G E R M A N Abdeckung für eine…
Created these clips to hold the dashcam wire, they are small and hold the wire snug. Used 3m double-sided tape. Printed on Prusa MK3s using Prusament PETG filament at default settings. Please use brim, as the clip is small in size.
This should fit a 2013–2020 Pathfinder R52 rearview mirror with Homelink. This item replaces part of the cable trim already installed in the pathfinder, allowing a cable with a Ferrite core ring to be covered up. Ferrite core rings are…
This is a dashcam connector I made to connect a dashcam to the rearview mirror/screen of a Nissan Leaf 2024. There are two parts: A brace for the dascam itself - it connects to the existing screwholes of the dashcam with longer screws. A…
Folding Rear Rack Mount for Dashcams & Lights (Garmin, Cycliq, GoPro) This fold-out dashcam and rear light holder is designed for easy installation on bike racks. It positions the camera a bit higher and further out, which can help…
BACKGROUND: I'm using a Wolffilms Smartphone Dashcam Holder within my car as a smartphone mount. Unfortunately, the small connector piece between the suction cup mount and the smartphone mount broke some days ago so I decided, that this…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
Overview This dashcam rear-view mirror mount is designed so that the dashcam never falls down again. Usually, dashcams come with a suction cap mount for the windshield and these like to fall down on warm days, hitting dumps or just after…
Print Settings: Material: PETG - ASA or ABS recommended. Supports: Yes - Build Plate Only Infill: 100% Concentric This is a minimal flag style mount for rear dashcams in vehicles that have movable windows. Such as Toyota trucks and full…
Simple mount for a 70Mai dashcam. Printed with 100% infill in ABS to combat the heat-sagging which happened with other mounts.
The windshield shadow ‘dots’ made it difficult to use electrostatic stickers to mount a dashcam on the windshield. This backet clips onto the mirror assembly and securely mounts a Vantrue dashcam. Printed on an OPXL5H with Polymaker…
A TPU lens cap for Nextbase 422GW dashcam to protect the lens when removing it from the windshield mount. The way it's designed, the cap offers a secure fit and doesn't slip off despite the cone shaped lens.
The backplate for the dashcam can be damaged when removing, this is to replace it. Printed using PLA at 0.2mm layer height tree structure support used, flat face down on build plate
I had a 70mai (sometimes referred to as Xiaomi) A810 (the A800 is likely the same) dashcam mounted and wanted to replace it with a Comma 3X. While I could have just replaced the mount I decided to just adapt the existing one for the Comma…
Since I have more than 1 car I designed a new mount to swap the dashcam between cars. Printed at .3 resolution but probably be best at .2 or lower for the mount tab. I printed a test piece in PLA but will use PETG to survive summer car…
this is the model of the dash camera i made the support for! https://www.aliexpress.com/item/1005008122563945.html?spm=a2g0o.order_list.order_list_main.90.1f581802nifd4g i lost mine so i desgined this so i can mount it again to the glass…
BYD Dolphin Surf (EU market) dashcam mount crafted for original BYD camera EL-3776900. Be extra careful when removing the right pillar-A cover. Don't use sharp tools. To access the glove compartment simply open it and push on the sides…
We recently got a Garmin dashcam and found that the mounting system was different from other dashcams we've used. This print will adapt the Garmin balljoint mount to universal clamp mounts used on a wide array of dashcam mirror mounts.…
A simple clip mount to attach a rear dashcam to a Toyota Tundra (or any other similar truck). This clips in place and stays snug. Use double sided tape and mount your dashcam to it. See photos. Can be clipped into the roof lining on…
I created this adapter to use a second 70Mai Dashcam for rear video on the Mini Cooper from my son. This will fit any model with a pipe diameter of 14mm and a distance (middle-to-middle) of 110mm. It is designed to be mounted on left side…
you just need a bolt with about 10mm 1/4" thread to screw into the camera. holds the camera so it does not obscure the drivers view. Currently printed in PLA, as it is winter but plan to reprint in ABS-GF, but for now seems to hold nicely
A mount for putting a generic dashcam "cube" camera onto your license plate frame. Designed to go on the bottom. Included is a second version with the ends trimmed down for people with smaller printers.
What it is Adapter to reuse an existing 15mm dashcam ball-joint windshield mount and attach a DJI Action 4 using the Tripod Mount Adapter . Compatibility 15mm ball joint (measure your ball diameter to confirm) DJI Tripod Mount Adapter…
Succion cup holder part for dashcam. Use others parts from original dashcam holder to make full assembly. The original holder is too bent or to use if the original part is broken. You can adapt to many others designs.
Print at 0.16mm layer height for best results. Works well in PLA, but it will probably not survive the summer heat. If it does not go on easily, slide it on from the side.
Got tired of the cam constantly falling down as no sticky tape/pad would stick to the plastic cover on the boot lid “roof”. I've looked everywhere for stls that fit my camera type and found the model I based this off although the camera…
Included basic Quadlock disk adaptor. It can simply be combined with our models on print bed for other options. No surprise PLA is not suitable for these mounts in Oz summer. Might even be struggling with PETG. PETG seems to be holding…
🚗 Prestigio RoadRunner 585 Dashcam Mount – 3D Printable Replacement This is a 3D printable replacement camera mount designed specifically for the Prestigio RoadRunner 585 Full HD DVR dashcam . The mount provides a secure and stable fit ,…
Made a Base for my dashcam, because i dont like to install it permanently. Use some double sided tape and stick the camera on to the base! I also added some kind of rubber feet (i reccomend Uhu Patafix [called here in germany]) at the…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations, This I did several years ago, but never published. The model has been on my wife car since 5+ years without any incident Since I did not wanted to use…
I took the work done by https://www.printables.com/@AJQuick and did some adaptations. This is the second adaptation I did, but feed mostly from my previous model (which I adapted from AJQuick). I needed to do a second adaptation because…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
The original suction cup only lasted 7 years, unfortunately. Then the plasticizer leached out of it (AEG couldn't have known I use my car outdoors, and the sun in Northern Germany is unexpectedly harsh...). Anyway... So I bought a new…
This is a CPL filter mount for the blueskysea B1W dashcam. This mount press fits into the lens housing of the b1w with just your hands, the cpl filter also press fits inside. No glue, no mess. You will need the CPL filter for the A119…
Hey, i upgraded my Dashcam to a VIOFO A329 and now the original design doesnt fit anymore. So i re-designed the clip with a mount for the new rear cam. Use the Mount file from the original design. Now you can screw the Dashcam directly to…
This model is a replacement shell for the GPS module in a NextBase Duo dashcam, to replace it if it breaks cause they're pretty weak where they attach to the suction base. Print both sides in a heat and UV resistant filament, I used ASA.…
This is a custom 3D-printed alignment shim designed specifically for the Mangoal Ford Maverick 4K Dashcam (Model: MGA 032DBA). Its purpose is to correct the factory camera angle, which can otherwise capture an excessive amount of the…
Windscreen mount for Nextbase Piqo dashcam. Snug fit. Use double sided tape to fix the mount to the windscreen.
Changed the dimensions of the model to fit my specific dashcam ( https://www.amazon.com/gp/product/B0BJZQ37G7/ref=ox_sc_saved_title_8?smid=A3CIGEUYW4U1DT&psc=1 ) and my car (Toyota Camry SE 2024) Photos in the car are of the mockup I made…
I recommend not printing it black (or at least paint it white after printing) since it will get hot , especially in summer. When installing the fan be careful with the cable , I broke mine by pulling too hard and I had to resolder the…
Front camera mount for Viofo A229 Pro and Viofo A329 Pro Dashcam Obviously it has no GPS or power electronics. Just a simple mount for use in rentals for example. Print in a material that doesn't easily warp in a heated car. I used ASA,…
If your Kawa 2k Mini 3 (or similar) dash cam hinge breaks - this can save the day Fits over the original window mount - blob of E6000 glue to secure! You need to snip of the broken hinge post off the camera body so it slides into the…
The rear camera that comes with the RedTiger F7N Dashcam is intended to be mounted on the rear of the car and the bracket that in included is limited to mounting on horizontal surfaces. This bracket will allow you to mount the camera on…
A purpose-built enclosure for turning a Raspberry Pi 5 into a compact, mountable dashcam. Designed for continuous recording of GPS-tagged video, this case integrates a camera module, GPS receiver, and a small onboard OLED-display into a…
Accidentally broke the dashcam mounting clip off the stem that swivels in the suction cup mount. Amazon sells replacement mounts with a variety of clips, but it wasn't 100% clear they would work with my dashcam. Since the suction cup and…
Raises the CarPlay unit up so the front dashcam can see above the dash. It was built for the unit I bought off of AliExpress: 10.26"4K 64G TouchScreen Portable Wireless CarPlay Android Auto Truck Dash Car Stereo Bluetooth GPS Navi…
My friends forgot to remove their mount from the rear windscreen and needed a new one... Rather than paying $15 + shipping I just knocked this out, partially from memory. I've provided two models, one that sorta follows the lines of the…
I got a cheap dashcam from China that came with a remote backup camera. In my case, I didn't want to mount on the back bumper, but on the interior of my truck. I designed this simple bracket and mount to do the job. The bracket is matched…
Our van doesn't have a rear view mirror but had a nice holder already mounted on the windscreen. Since vacuum mounts tend to fall off and gluing a holder isn't my thing, I designed a simple mount that snaps into place. You need to take…
This is a dashcam mount for a Blackvue DR750S and a Subaru with Eyesight & the headlight high beam assist sensor. This print fits nicely around the headlight sensor and can be affixed with some double sided tape. It was designed to work…
The windscreen centre pod is a good place to attach a dashcam but the covers are quite thin, they aren't flat in the centre and i found creaked annoyingly if a camera was just stuck onto them. This attachment clips around the pod and just…
Mount for Fullscreen Dashcam Mirror for Fiat Ducato 250. Added a Riser for RVs with Front-Plissee printed in ABS with Support and 50% Infill. M4 Screws and Nuts needed Photo shows older smaler Version.
