1 / 3
15mm Dashcam Ball Joint → DJI Action 4 Tripod Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter: 15mm dashcam ball joint → DJI Action 4 tripod mount
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
What it is
Adapter to reuse an existing 15mm dashcam ball-joint windshield mount and attach a DJI Action 4 using the Tripod Mount Adapter.
Compatibility
15mm ball joint (measure your ball diameter to confirm)
DJI Tripod Mount Adapter
M6x20 hex bolt
Print recommendations
Material: PETG / ASA / ABS recommended for car heat (PLA may soften).
Layer height: 0.2mm (finer improves ball surface)
Infill: 20%
Supports: No
Orientation
Print with the flat base on the bed. If the ball surface is tight/rough, use a finer layer height or light sanding.
Assembly
I used Loctite Super Glue to glue printed parts together.