1 / 3
15mm Dashcam Ball Joint → DJI Action 4 Tripod Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter: 15mm dashcam ball joint → DJI Action 4 tripod mount
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
What it is
Adapter to reuse an existing 15mm dashcam ball-joint windshield mount and attach a DJI Action 4 using the Tripod Mount Adapter.
Compatibility
15mm ball joint (measure your ball diameter to confirm)
DJI Tripod Mount Adapter
M6x20 hex bolt
Print recommendations
Material: PETG / ASA / ABS recommended for car heat (PLA may soften).
Layer height: 0.2mm (finer improves ball surface)
Infill: 20%
Supports: No
Orientation
Print with the flat base on the bed. If the ball surface is tight/rough, use a finer layer height or light sanding.
Assembly
I used Loctite Super Glue to glue printed parts together.