1 / 6
HP f210 Dashcam Mount for Vertical Rear Window
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van.
Requires modification to the mount that comes with your dashcam.
I have printed the parts in PETG and they have survived a summer in Brisbane, Australia without issue!
Additional Parts
1x M4x10 screw
1x M5 nut
3x Suction cups with an 8mm stalk
Assembly (Refer to photo montage)
- Gather all parts required.
- Cut your mount as shown and drill and tap an M4 hole approx. 10mm deep.
- Fit the mount to your dashcam.
- Find your 3D printed parts.
- Insert the M5 nut into the recess in the small bracket.
- Use the screw knob that came with your dashcam to fit the bracket to the main mount.
- Press in the suction cups on the front face as shown.
- Make sure they are well seated.
- Fit the assembly to the dashcam as shown in the first large photo.