1 / 6
HP f210 Dashcam Mount for Vertical Rear Window
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van.
Requires modification to the mount that comes with your dashcam.
I have printed the parts in PETG and they have survived a summer in Brisbane, Australia without issue!
Additional Parts
1x M4x10 screw
1x M5 nut
3x Suction cups with an 8mm stalk
Assembly (Refer to photo montage)
- Gather all parts required.
- Cut your mount as shown and drill and tap an M4 hole approx. 10mm deep.
- Fit the mount to your dashcam.
- Find your 3D printed parts.
- Insert the M5 nut into the recess in the small bracket.
- Use the screw knob that came with your dashcam to fit the bracket to the main mount.
- Press in the suction cups on the front face as shown.
- Make sure they are well seated.
- Fit the assembly to the dashcam as shown in the first large photo.