Pruveeo Dashcam Rearview Mirror Mount for Camry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the “Prestigio RoadRunner 585 DVR Camera Mount – 3D Printable Car Dashcam Holder” by AdrianM. on Printables
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Changed the dimensions of the model to fit my specific dashcam (https://www.amazon.com/gp/product/B0BJZQ37G7/ref=ox_sc_saved_title_8?smid=A3CIGEUYW4U1DT&psc=1) and my car (Toyota Camry SE 2024)
Photos in the car are of the mockup I made for this model. The other photos reflect the model uploaded here exactly. All major dimensions are the same, just cleaned up some lines from the first mockup :)
Recommend printing in at least PETG for heat resistance
Hardware:
I used 2 M6x60mm bolts and wingnuts to secure it around my mirror. Obviously, they don't have to be 60mm; the minimum is around 40mm in length
Bolts: https://www.lowes.com/pd/Hillman-6mm-1-x-60mm-Phillips-Drive-Machine-Screws-2-Count/999994926
Wingnuts: https://www.lowes.com/pd/Hillman-1-x-6mm-Zinc-plated-Steel-Regular-Nut/3012717