RedTiger F7N Dashcam rear camera mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket will allow you to mount a RedTiger F7N Dashcam rear camera on the inside of a rear window in a pickup.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 256
- Wydruki
- 0
- Wyświetlenia
- 2198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The rear camera that comes with the RedTiger F7N Dashcam is intended to be mounted on the rear of the car and the bracket that in included is limited to mounting on horizontal surfaces. This bracket will allow you to mount the camera on the inside of a vertical rear window like is found in most pickups. It can probably also be used if the window has a bit of a slope since there is a bit of angle adjustment in the original bracket. In the picture you'll notice that I mounted the camera using Command Strips. That's probably not a good long term option but I'm still deciding on the final location for the camera. For a more permanent mount I would use the 3M tape like the type that is included with the camera.