Xiaomi 70mai A810 Dashcam Mount to Comma 3X 40mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xiaomi 70mai A810/A800 Dashcam Mount to Comma 3X 40mm adapter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I had a 70mai (sometimes referred to as Xiaomi) A810 (the A800 is likely the same) dashcam mounted and wanted to replace it with a Comma 3X. While I could have just replaced the mount I decided to just adapt the existing one for the Comma 3X.
I printed this in PETG with 0.4mm nozzle and 0.2mm layers and 4 walls minimum. You will need supports.
Mount can be modified in https://www.tinkercad.com/things/1jg5Wj1mGPv-xiaomi-70mai-a810-dashcam-mount-to-comma-3x-40mm if you need to adjust tolerances (I found PETG shrunk a bit more than the PLA test pieces) or the mount height