Xiaomi 70mai A810 Dashcam Mount to Comma 3X 40mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Xiaomi 70mai A810/A800 Dashcam Mount to Comma 3X 40mm adapter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I had a 70mai (sometimes referred to as Xiaomi) A810 (the A800 is likely the same) dashcam mounted and wanted to replace it with a Comma 3X. While I could have just replaced the mount I decided to just adapt the existing one for the Comma 3X.
I printed this in PETG with 0.4mm nozzle and 0.2mm layers and 4 walls minimum. You will need supports.
Mount can be modified in https://www.tinkercad.com/things/1jg5Wj1mGPv-xiaomi-70mai-a810-dashcam-mount-to-comma-3x-40mm if you need to adjust tolerances (I found PETG shrunk a bit more than the PLA test pieces) or the mount height